EKM Metering

For anyone finding this later: if you need billing beyond flat rate (TOU, tiered, demand, actual utility tariffs) for electric, water or gas, Energy311 works with EKM Push data and Encompass to produce tenant-ready bills, plus payments and collections. Details here: ...

... invoicing and collections. No new utility meters needed. We work alongside EKM's Encompass platform. Bills at the actual utility rate — TOU, demand, tiers, taxes and fees, updated automatically when rates change. No flat per-kWh rate that drifts, no RUBS splits. Electric, water and gas on ...

For the LAN API, you can either use a fixed local IP address (if you set the Push3 gateway to a fixed IP) as the example above shows using 10.200.0.21 in our case ... Or (if your network supports it and your HA gateway is on the same network) you can use .local, which is great if the Push3 gateway l...

Here are the settings we use to gather data with Home Assistant. We use both the cloud REST API and/or the Push3 LAN APIs (direct from the Push3 gateway itself) to gather data from Omnimeters and ioStacks. Please see the attached image and the contents of our sensors.yml file below. You will want to...

... access different options or open the main window. It probably wouldn't take much for the programmers to add that functionality, but if it's not in demand, it's probably not worth the trouble. It's not a big deal to continue shutting it down from the Task Manager so I can re-open it, I was just ...

... text output as follows: 1414409580 meter: 11766 19 L1 Volts: 241.8 L1 Amps: 0.0 L1 Power: 0 L1 PF: -0.00 CT Size: 200 Frw kWh: 533.0 Rev kWh: 0.0 Demand: 6915 Demand Period: 1 1414409581 meter: 12000 19 L1 Volts: 229.6 L1 Amps: 2.6 L1 Power: 596 L1 PF: -0.98 CT Size: 200 Frw kWh: 15397.9 Rev kWh: ...

... heater but are considering a change to an all-electric heat pump system and are concerned that our 100A service will be enough to handle the 25A demand from the heater, especially when the coffee pots are turned on (can't do astronomy without coffee!). We chose the Omnimeter I v.3 to monitor ...

I am using an OmniMeter UL v4 with a PUSH3 (beta) unit to characterize power demand from small appliances (laundry machines, hot tubs, etc.) and would like to obtain graphs of instantaneous watt/amp demand with 1-second resolution. I tried setting up an Encompass.io ...

Hello Stishsun, PVOutput is a 3rd party site that takes in your Push data and displays it to you. I think they take in Total Watts and Total kWh. RMS_Watts_Ln_1, RMS_Watts_Ln_2, RMS_Watts_Ln_3 are the watts on each line. I do not think PVOutput displays this data on their site. If you have RMS_Watts...

we also check the API http://io.ekmpush.com/readMeter/v4/meters/300000211/key/MTEwMjg3Ojg2Njc2Ng/count/1/format/csv/ Meter,Date,Time,Time_Stamp_UTC_ms,kWh_Tot,kWh_Tariff_1,kWh_Tariff_2,Rev_kWh_Tot,Rev_kWh_Tariff_1,Rev_kWh_Tariff_2,RMS_Volts_Ln_1,RMS_Volts_Ln_2,Amps_Ln_1,Amps_Ln_2,RMS_Watts_Ln_1,RMS_...