Search found 863 matches
- Sun Jan 21, 2024 7:28 pm
- Forum: EKM Metering Systems
- Topic: Account keys for used units
- Replies: 1
- Views: 5266
Re: Account keys for used units
We need the original owners permission to transfer them to you. Just have them write us an email with the email address that they used to purchase the meters. If you do not know the original owner, you can email us the meter numbers, and we will contact the original owner. Then once we have permissi...
- Sat Jan 20, 2024 4:52 am
- Forum: EKM Metering Systems
- Topic: Pulse inputs to RS485 Push 3 protocol with Raspberry Pi
- Replies: 6
- Views: 31057
Re: Pulse inputs to RS485 Push 3 protocol with Raspberry Pi
Hello, Im glad to hear you are interested in the ioStack. In our opinion it is a cool piece of kit! The ioStack is hot off the press, so it will take us a while to get our documentation in order. We do not plan to open source the ioStack hardware, but we do plan to share the ioStack RS485 communicat...
- Wed Jan 17, 2024 12:43 pm
- Forum: General Discussions
- Topic: Question about enclosures and outside temperatures
- Replies: 1
- Views: 8435
Re: Question about enclosures and outside temperatures
In our experience, the concern usually has to do more with heat than with cold. As long as the enclosure is in a shaded location you should be fine. The issue comes if the clear enclosure is mounted in very hot direct sun, the clear lid can act like a magnifying glass. Electronics really hate heat, ...
- Wed Jan 17, 2024 9:36 am
- Forum: General Discussions
- Topic: Space in EKM0303015 UL Enclosure
- Replies: 1
- Views: 4481
Re: Space in EKM0303015 UL Enclosure
Yes, you should be able to fit all of that equipment in the XL enclosure. This attached image shows an XL 303015 enclosure, with 3 x Omnimeter Pulse v.4, 1 x DIN rail power supply, 1 x EKM Push3 gateway, and 1 x RUT240 Cellular modem installed inside, you should have space to run the CAT5 cables and...
- Fri Jan 12, 2024 9:47 am
- Forum: Developers Sandbox - Meter Data
- Topic: Send data without a Push
- Replies: 4
- Views: 30412
Re: Send data without a Push
The only way for meter data to get into the Push cloud system is via a Push3 that is assigned to your meter. It would be quite a headache to support incoming data from a variety of computers/gateways/3rd party meters/anomalous data/etc So that is why we lock it down in this way. And yes, on top of t...
- Fri Jan 12, 2024 9:36 am
- Forum: General Discussions
- Topic: EKM Dash iSerial IPv6 connectivity
- Replies: 3
- Views: 6667
Re: EKM Dash iSerial IPv6 connectivity
Very interesting. We will put it in the hopper for Dash development. Thank you for the explanation.
- Mon Jan 01, 2024 4:59 am
- Forum: General Discussions
- Topic: EKM Dash iSerial IPv6 connectivity
- Replies: 3
- Views: 6667
Re: EKM Dash iSerial IPv6 connectivity
Im sorry, this is quite a ways out of my wheelhouse. Im not sure if the iSerial supports IPV6 or not. I suspect not, because it is such a simple device. I tried searching the web for: ATC-1000 "ipv6" ATC-1200 "ipv6" but did not come up with anything definitive. We have stopped se...
- Wed Dec 20, 2023 3:40 am
- Forum: EKM Metering Systems
- Topic: options to get the push3 data to the internet
- Replies: 4
- Views: 22022
Re: options to get the push3 data to the internet
What is the reason a LoRWAN would not work? (Push3 wifi to esp32, then esp32 sends data out on LoRaWAN to a LoraGateway and now it's on the internet) In theory someone could develop a device that would read EKM Omnimeters, parse the data, and make it available over LoRaWAN. This device could send t...
- Sat Dec 16, 2023 2:13 pm
- Forum: EKM Metering Systems
- Topic: options to get the push3 data to the internet
- Replies: 4
- Views: 22022
Re: options to get the push3 data to the internet
Hello --Oz--, welcome to the forum! Here are the options as I see them for how to connect your Push3 to the internet (in order of lowest cost) 1. Ask your tenant or your neighbor if you can connect the Push3 gateway to their wifi (or come to an arrangement if you have to). The Push3 has built in wif...
- Thu Nov 30, 2023 4:40 am
- Forum: EKM Metering Systems
- Topic: EKM-Omnimeter-I-v3-Install Question
- Replies: 2
- Views: 23570
Re: EKM-Omnimeter-I-v3-Install Question
To our knowledge here are the possible ways that you could install an Omnimeter on a system and get accurate measurements. See the 5 possible electrical systems here: https://help.ekmmetering.com/support/solutions/folders/6000200176 If you have a single phase 3-wire system with 2 hots and a neutral,...