is there a memory?

General questions and discussions focused around the EKM Metering System. Discuss your meters, installations, and meter communications here.
Post Reply
saadhamad
Posts: 6
Joined: Wed Aug 03, 2016 2:55 am

is there a memory?

Post by saadhamad »

Hi every one,
I bought Ekm-OmniMeter v.3 , but I don’t know how to recover the data in case of having no wifi.
Also, if there is a memory, how big is it, how long it takes to be full or does it over read the older data?
Regards,
Jameson
Posts: 860
Joined: Fri Nov 04, 2011 7:42 pm
Location: Santa Cruz, CA
Contact:

Re: is there a memory?

Post by Jameson »

Hello saadhamad, welcome to the forum.

The Omnimeter v.3 only stores Total kWh, Reverse kWh, Total kWh in 4 TOU periods, Reverse kWh in 4 TOU periods. It also stores 6 months of Total and Reverse kWh values taken on the last day of each month (these values are only accessible via the EKM Dash using a USB or iSerial converter) It does not store real-time values like watts, amps, volts or power factor. If you want a full dataset (a read a minute for example) you will have to connect your EKM Omnimeter to either a computer running the EKM Dash software, or to the EKM Push system.
Jameson
EKM METERING
http://www.ekmmetering.com
831.425.7371
Post Reply