Hi.
I have a problem with ekm iserial v.2
kernel V1.44.3 2012/05/09
can i upgrade the firmware?
how can i do it?
because i dont find where...
thanks
ekm metering iserial v2
Re: ekm metering iserial v2
It depends on how old your iSerial is. The older versions did not allow an upgrade. If you can upgrade, you can try this process:
===
First download the new iSerial firmware here (file is called nu_flashapp): http://documents.ekmmetering.com/iSeria ... ashapp.bin
Then log into your iSerial using a PC with either Internet Explorer or Firefox. Or Firefox on Mac OSX.
Click on Firmware Update
If it asks for a password enter "admin"
iSerial will erase flash which takes a few seconds.
Use the browse button to find the image that you downloaded (called nu_flashapp.bin or nu_flashapp)
Open or Select nu_flashapp.bin and click "Update"
Wait at least a minute.
===
First download the new iSerial firmware here (file is called nu_flashapp): http://documents.ekmmetering.com/iSeria ... ashapp.bin
Then log into your iSerial using a PC with either Internet Explorer or Firefox. Or Firefox on Mac OSX.
Click on Firmware Update
If it asks for a password enter "admin"
iSerial will erase flash which takes a few seconds.
Use the browse button to find the image that you downloaded (called nu_flashapp.bin or nu_flashapp)
Open or Select nu_flashapp.bin and click "Update"
Wait at least a minute.