Search found 16 matches

by Kailua
Sun Oct 25, 2015 4:04 am
Forum: www.Encompass.io
Topic: Update to encompass.io
Replies: 1
Views: 4996

Re: Update to encompass.io

It looks like Encompass is now reading v.4 two decimal place KWh readings correctly. That's a big fix. When I request a pdf from Encompass, I get a response on the webpage that the pdf has been sent, but I don't receive it. Hopefully this will be resolved soon, so we can start using the pdfs for bil...
by Kailua
Tue May 26, 2015 1:22 pm
Forum: www.Encompass.io
Topic: encompass.io – First Impressions?
Replies: 10
Views: 12487

Re: encompass.io – First Impressions?

Update on my April observations, from the bottom up... Big change: Aggregating group data appears to be working and displaying correctly in the widgets. Groups and their subgroups now are reflecting accurate totals with respect to one another, except for data from v.4 meters. This is good to see, as...
by Kailua
Sat Apr 11, 2015 11:22 pm
Forum: EKM Metering Systems
Topic: EKM Omnimeter Pulse v.4 - Pulse Counter Problem
Replies: 46
Views: 42146

Re: EKM Omnimeter Pulse v.4 - Pulse Counter Problem

Please let me know when you have fix for this problem. I'll send my meter in for new firmware if it will fix this problem. My meter is on Hawaiian Electric service. We have an occasional outage, but it should be fairly stable.
by Kailua
Sat Apr 11, 2015 11:14 pm
Forum: www.Encompass.io
Topic: encompass.io – First Impressions?
Replies: 10
Views: 12487

Re: encompass.io – First Impressions?

Encompass still reads v.4 meter at 10X actual reading. I'm still not getting emailed pdf files. I can't generate pdf files online now, either. I just get an error message when I try. As I can't see the pdfs, I don't know if there's been any progress in correcting the group totalling problems I repor...
by Kailua
Tue Mar 31, 2015 2:50 am
Forum: EKM Metering Systems
Topic: EKM Omnimeter Pulse v.4 - Pulse Counter Problem
Replies: 46
Views: 42146

Re: EKM Omnimeter Pulse v.4 - Pulse Counter Problem

Here's the Hex: Send http://io.ekmpush.com/readMeter/v4/meters/300000218/count/1000/format/json/key/NjUyMTk0ODg6bXRJVTlDQWM/alias/details/since/1427795115164 Receive { "readMeter": { "Requested":1, "ReadSet":[ { "Meter":"300000218", "Group":65219488, "Interval":60, "Protocol":"v4", "MAC_Addr":"40:16...
by Kailua
Tue Mar 31, 2015 2:38 am
Forum: EKM Metering Systems
Topic: EKM Omnimeter Pulse v.4 - Pulse Counter Problem
Replies: 46
Views: 42146

Re: EKM Omnimeter Pulse v.4 - Pulse Counter Problem

My v.4 #300000218 gas meter pulse count stops counting at random and unpredictable times. I'm not sure what makes it start again, but it stopped again about a week ago. I'll go try turning the power off and on tomorrow and see if it starts counting again. Might there be a problem with these early s/...
by Kailua
Sat Mar 28, 2015 11:21 pm
Forum: www.Encompass.io
Topic: encompass.io – First Impressions?
Replies: 10
Views: 12487

Re: encompass.io – First Impressions?

I now have a total of 7 electrical meters and 1 gas meter connected to 2 push units. The 2 push units are at different locations. The meters are set up in two main groups, one at each location. Each of the main groups is further divided into sub-groups, 2 at one location, 3 at the other. I have opte...
by Kailua
Thu Feb 12, 2015 12:40 pm
Forum: www.Encompass.io
Topic: encompass.io – First Impressions?
Replies: 10
Views: 12487

Re: encompass.io – First Impressions?

I just learned that Encompass reads v.4 kWh at 10X the actual meter reading. Apparently this is due to v.4 reporting two digit decimals, and will be corrected in the months to come. I adjusted the kWh cost to 1/10 actual, so the $ value will be correct even though the kWh being reported is frighteni...
by Kailua
Mon Feb 09, 2015 3:58 am
Forum: www.Encompass.io
Topic: encompass.io – First Impressions?
Replies: 10
Views: 12487

Re: encompass.io – First Impressions?

Now that I have Push up and running with v4, I'll be waiting for the addition of gas metering through Encompass. I will be adding another Push and 5 more meters to my Encompass account later this week, so I'll have more data to play with while I wait. Once the gas metering is brought on line, I'll b...
by Kailua
Sat Feb 07, 2015 7:28 pm
Forum: EKM Metering Systems
Topic: EKM Push
Replies: 53
Views: 45542

Re: EKM Push

Jameson, Thanks for your help in getting the v4 working with Push. I'm amazed that just connecting the meter to the Push and connecting the Push to my network puts all the readings online without any special knowledge or skills on my part. I'll keep that part to myself, though, and everyone here wil...