EKM Metering

Hi Everyone, I am connecting a Omnimeter II v.3 (3phase - 4wire) to a new Cummins diesel genset that puts out 600A per leg. I ordered the EMK 600A solid CT rings (only type offered by EKM for 600A) and these have a 45mm inner diameter. I am running three electrical cables in parallel for each phase ...

Thanks Jameson. I just wanted to send an note on the final outcome on this. My meter was somehow faulty and it was quickly swapped out for a new one. I know it was a new one as the serial number was changed. I got my new meter and got it installed. And it is finally running on all cylinders (ie. cha...

Hi Jameson, We checked all the contacts and they are solid and connected as well as the snapped CT rings. The expected reading on phase 1 (CT ring connection 1 & 2) is 4 times lower than it should be as measured by two other ammeters. We measured 180 amps on the other meters but only 45 amps on ...

Hi EKM, I am running the Omnimeter 4.0 into the iSerial. It is connected and working and I can see my measurements through the Dash software, but I am having a problem with one phase. It is reading much lower than expected and lower when compared to a Fluke ammeter. Voltage, frequency and other read...

Hi Jameson, Thanks for the reply. I really appreciate your interactions with users through this blog. Is there capability to get a real-time data stream import into excel using the "get external data" function with the Omnimeter v4 & iSerial hardware set-up? I see that this is possible...

Hi EKM, Got my Omnimeter v4 operational and connect to an iSerial to get the data flowing through our LAN. And I was successful (after using the "Discover" feature in the EKM Dash software) to see my data flowing using the Dash software. So it is all working correctly and I am somewhat hap...

Thanks for the quick reply. I was hoping for a solution with a more granular output than on/off at 40psi! Plus I already have plans to fill the other two pulsed inputs into my OmniMeter v.4. One for domestic water coming in from land (as I mentioned already) and the other two to monitor the saltwate...

Hi EKM, I just received my Omnimeter v.4 and I am very excited to get it installed and remotely read the pulsed water meter for our floating restaurant. As you can imagine, an unwatched broken dockside waterline inside a vessel can be a very dangerous situation. But my question is not about measurin...