Search found 5 matches
- Fri Aug 15, 2014 1:57 pm
- Forum: Gas Meters
- Topic: natural gas flow rate measurement
- Replies: 3
- Views: 18587
Re: natural gas flow rate measurement
I would not be running the HHO through the meter, only natural gas. What I would hope to show is 1. The rate of flow of natural gas at 1800rpm at various loads using a load bank 2. The rate of flow of natural gas at 1800rpm at various loads using a load bank while adding HHO If I buy a EKM Omnimeter...
- Fri Aug 15, 2014 7:58 am
- Forum: Gas Meters
- Topic: natural gas flow rate measurement
- Replies: 3
- Views: 18587
natural gas flow rate measurement
Hello All I have an application, cogen plant that I am testing. I would like to measure the rate of consumption of the engine under various loads and then compare the results of this to the same loads while injecting HHO to the system. Will the PGM.75 show me the flow rate?? Is it available in 1&quo...
- Mon Aug 26, 2013 11:57 am
- Forum: Electric Meters
- Topic: PLC/HMI
- Replies: 5
- Views: 11290
Re: PLC/HMI
Ordered 2 of your converters, so when they arrive I will try to steup the comms. I don't know if this is going to work since the PLC is expecting to see ASCII string. What's the dirrenence betweem read and request??
Thanks David
Thanks David
- Sat Aug 24, 2013 1:17 pm
- Forum: Electric Meters
- Topic: PLC/HMI
- Replies: 5
- Views: 11290
Re: PLC/HMI
I do not have RS485, but I do have RS232 port on the processor(Allen Bradley 1747 L551) channel 0 which could be used. Channel 0 can be configured for ASCII Port Buffer. Would I need a RS485 to RS232 converter?? Read the following, are these assumptions correct: It appears that the meter is sending ...
- Thu Aug 22, 2013 2:06 pm
- Forum: Electric Meters
- Topic: PLC/HMI
- Replies: 5
- Views: 11290
PLC/HMI
Hello all,
I have project that I'm working on, a verticle axis wind turbine, my control system is allen bradley SLC500 and RSView32 HMI software.
What I woild like to do is bring the information from your meter in my control system and display on the HMI screen. Where do I begin??
Thanks David
I have project that I'm working on, a verticle axis wind turbine, my control system is allen bradley SLC500 and RSView32 HMI software.
What I woild like to do is bring the information from your meter in my control system and display on the HMI screen. Where do I begin??
Thanks David