hi Jemson,
we measured the voltage between line 1 and line 2 with a handheld voltemeter, and we found it 390 where as the omnimeter displays 350.
why these values are not the same?
Regards,
Nacereddine
Search found 5 matches
- Thu Apr 03, 2014 6:30 am
- Forum: EKM Metering Systems
- Topic: omnimeter v.3 3-wire 3-phase
- Replies: 5
- Views: 9020
- Thu Mar 27, 2014 2:49 am
- Forum: EKM Metering Systems
- Topic: omnimeter v.3 3-wire 3-phase
- Replies: 5
- Views: 9020
Re: omnimeter v.3 3-wire 3-phase
hi jameson, thank you for the quick reply. using a voltmeter, the values for U1, U2, and U3 are 390, 390, and 390. the omnimeter is displaying 350, 0, and 390. is this normal?. i also checked your first link, and i have another question. the image is displaying 3 CTs and the video shows only 2 CTs. ...
- Tue Mar 25, 2014 9:45 am
- Forum: EKM Metering Systems
- Topic: omnimeter v.3 3-wire 3-phase
- Replies: 5
- Views: 9020
omnimeter v.3 3-wire 3-phase
hi, we are using an omnimeter v.3 with a 3-wires, 3-phases configuration(no CT on phase 2 and phase 2 connected to neutral). the omnimeter is displaying : 350 for U1. 0 for U2. 390 for U3. where it should display ~390 for U1, U2, and U3. we would like to know if there any additional configuration th...
- Sat Nov 09, 2013 2:06 am
- Forum: EKM Metering Systems
- Topic: how to use the 485bee
- Replies: 3
- Views: 7234
Re: how to use the 485bee
Hi Jameson,
Regarding the distance, we put the two 485bees very close to each other as you can see from the image.
We made sure that the antennas are well connected by unplugging then plugging them back.
Regarding the distance, we put the two 485bees very close to each other as you can see from the image.
We made sure that the antennas are well connected by unplugging then plugging them back.
- Fri Nov 08, 2013 3:26 am
- Forum: EKM Metering Systems
- Topic: how to use the 485bee
- Replies: 3
- Views: 7234
how to use the 485bee
Hi, We recently purchased a group omnimeters, iserials, and 485bees. Before installing the whole system, we performed the following test. We connected an omnimeter to an iserial with twisted pair of wires. The software didn't have any problem retrieving data from the omnimeter. Then, we put 2 485bee...