EKM Metering

After a weekend plus three test holidays I can confirm that my v.3 Omnimeter with firmware version 20 also stays in the Weekend/Holiday (WE/H) schedule, just as Gary, JayDee and Jameson describe. All my TOU accumulation problems occurred right after a WE/H, and each WE/H watched reproduced this. No ...

<...> v.3 meters <...> Max Demand needs to be reset using the EKM Dash.The v.4 meter however does have this as an option, you can set it to reset Max Demand either Hourly, Daily, Weekly, or Monthly. Thanks, Jameson, for the clear Max Demand statement. The Dash setup menu option led me to believe th...

Hi Karl, As a matter of interest what is your V3 meter number and do you have any co-generation? Cheers, Gary Hi Gary, I have no co-generation (no solar panels, turbines, generators etc.). My v3 meter has number 10002631. Don't tell anyone. By the way, I also have a *Maximum Power problem* It's res...

Hello Karl and Gary, Thanks for your help. Can both of you email us or post screenshots of your meter "Rates" settings? <...> Sure. I sent you the screenshots per email, and Doug wrote back asking whether the settings shown are the ones I intended (i.e. the ones as specified in Post #1). ...

[... after disconnecting and shorting all three CTs...] the meter is still running and accruing wattage.. And the blinking indicator light is blinking.. Do to think it may be the L1, L2, L3, N attachments ? Hi Ruzzty, I am curious how this story continued. From the description I would expect your m...

BlueHornet wrote I have tried several different Schedule manipulations including those suggested by Jameson, however none seem to to be able to set the weekend rate schedule to my requirements. Hi Gary, Hi Jameson, I am stumped, and now believe to have the same problem, contrary to what I thought. ...

Jameson, thanks for the "Push servers are off a few minutes"reply, and the "Push2" lookout. If I set it to EST, Standard time, instead, it would get the 23:00 to 24:00 consumption onto the wrong day on 238 out of 365 days per year - that's worse. If I set it to UTC, these wrong-d...

...I still cannot get anything other than T1 to record the TOU data nor does the meter indicate a T2 ... P.S.: now I see one detail that's odd, in the screenshots: You define Rate 1 for On-Peak, and Rate 2 for Off-Peak, including Weekends. If so, the Schedule 2 screenshot should not show Rate 1, bu...

Hi Jameson, I double-checked your assumptions, and find them correct. This case needs 3 schedules, and 4 seasons. It also needs one more schedule for the weekends and holidays, which I didn't mention yet: They are all-day-long Off-Peak. The "Holidays" and "Schedules" tab made tha...

Great reply! Thank you for the screen shots - that makes the mind-bending more of a pleasure. Thank you, -- Karl