Search found 11 matches

by Wouter
Wed Jun 05, 2013 8:08 am
Forum: Developers Sandbox - Meter Data
Topic: Comments on new EKM Dash
Replies: 6
Views: 11924

Re: Comments on new EKM Dash

Love the EKM Dash. Feature request however: Allow the addition of a "virtual meter". The point is... I have a meter that monitors power to/from the grid. I have a meter that monitors solar power from my array. While I can export and add/subtract the data from the two meters, other than that I do not...
by Wouter
Mon Apr 22, 2013 1:55 pm
Forum: Electric Meters
Topic: Dash Feature request
Replies: 1
Views: 2634

Dash Feature request

Love the new Dash. Haven't done much with my meters for a while. Took them all down before an inspector came. Didn't want to scare him. Just starting to put them all up. FEATURE REQUEST: Would like the gathered data gets written to a .csv or text file after each read from the meters... would save a ...
by Wouter
Wed Jun 13, 2012 7:01 am
Forum: Electric Meters
Topic: Time slots on omni v.3
Replies: 1
Views: 2606

Time slots on omni v.3

How do you set them up. There are four kwh time slots. How do I set the times?

Wouter
by Wouter
Sat Jun 09, 2012 9:49 pm
Forum: Electric Meters
Topic: TCP Help
Replies: 2
Views: 3528

Re: TCP Help

Well I am finally getting a response... but not what I expected.

I am only getting 29 bytes back and I don't recognize it at all.

FF FB 01 FF FB 03 FF FB 00 FF FD 01 FF FD 00 FF FA 2C 05 09 FF F0 FF FA 2C 05 0C FF F0

Any idea?

Wouter
by Wouter
Fri Jun 08, 2012 10:35 am
Forum: Electric Meters
Topic: TCP Help
Replies: 2
Views: 3528

TCP Help

Okay... I've got a Omni v.3 meter hooked up to an Iserial box. It works and the software works and I have been successful in auto logging to Wattvision. However, I would like my own controller to read the data. I can not use RS485 since my controller is using it with other devices. There is no overl...
by Wouter
Thu May 31, 2012 10:22 am
Forum: Electric Meters
Topic: EKM Meter Communication options?
Replies: 7
Views: 7118

Re: EKM Meter Communication options?

"Up to 256 EKM-Omnimeters can be daisy chain connected to each EKM Push"

What is an EKM Push? Is this hardware or software?

Wouter
by Wouter
Fri May 25, 2012 2:05 pm
Forum: EKM Metering Systems
Topic: TCP Socket Failed to Connect
Replies: 2
Views: 4030

Re: TCP Socket Failed to Connect

Once again... Thanks.

I got it working. In preferences I used "HTTP://192..." Don't know why.


When I switched it to "192.168..." it worked. My mistake.


Wouter
by Wouter
Thu May 24, 2012 6:53 pm
Forum: EKM Metering Systems
Topic: TCP Socket Failed to Connect
Replies: 2
Views: 4030

TCP Socket Failed to Connect

I've hooked up the iserial device to my Omni Meter v.3. I can connect to the iserial to on http://192.168.1.125/. I've adjusted the setting as per the instructions. The software is able to read meter 123 - Omni test meter. It sometimes reads the second one. However, I constantly get TCP Socket faile...
by Wouter
Wed May 23, 2012 5:19 pm
Forum: Electric Meters
Topic: Pulse on the 25IDS
Replies: 5
Views: 4925

Re: Pulse on the 25IDS

It is 1 and 2. Found it.

Wourwe
by Wouter
Wed May 23, 2012 4:16 pm
Forum: Electric Meters
Topic: Pulse on the 25IDS
Replies: 5
Views: 4925

Pulse on the 25IDS

I presume the pulse comes off port 4 and 6?

Wouter