Search found 11 matches
- Wed Jun 05, 2013 8:08 am
- Forum: Developers Sandbox - Meter Data
- Topic: Comments on new EKM Dash
- Replies: 6
- Views: 19254
Re: Comments on new EKM Dash
Love the EKM Dash. Feature request however: Allow the addition of a "virtual meter". The point is... I have a meter that monitors power to/from the grid. I have a meter that monitors solar power from my array. While I can export and add/subtract the data from the two meters, other than tha...
- Mon Apr 22, 2013 1:55 pm
- Forum: Electric Meters
- Topic: Dash Feature request
- Replies: 1
- Views: 5648
Dash Feature request
Love the new Dash. Haven't done much with my meters for a while. Took them all down before an inspector came. Didn't want to scare him. Just starting to put them all up. FEATURE REQUEST: Would like the gathered data gets written to a .csv or text file after each read from the meters... would save a ...
- Wed Jun 13, 2012 7:01 am
- Forum: Electric Meters
- Topic: Time slots on omni v.3
- Replies: 1
- Views: 6163
Time slots on omni v.3
How do you set them up. There are four kwh time slots. How do I set the times?
Wouter
Wouter
- Sat Jun 09, 2012 9:49 pm
- Forum: Electric Meters
- Topic: TCP Help
- Replies: 2
- Views: 7707
Re: TCP Help
Well I am finally getting a response... but not what I expected.
I am only getting 29 bytes back and I don't recognize it at all.
FF FB 01 FF FB 03 FF FB 00 FF FD 01 FF FD 00 FF FA 2C 05 09 FF F0 FF FA 2C 05 0C FF F0
Any idea?
Wouter
I am only getting 29 bytes back and I don't recognize it at all.
FF FB 01 FF FB 03 FF FB 00 FF FD 01 FF FD 00 FF FA 2C 05 09 FF F0 FF FA 2C 05 0C FF F0
Any idea?
Wouter
- Fri Jun 08, 2012 10:35 am
- Forum: Electric Meters
- Topic: TCP Help
- Replies: 2
- Views: 7707
TCP Help
Okay... I've got a Omni v.3 meter hooked up to an Iserial box. It works and the software works and I have been successful in auto logging to Wattvision. However, I would like my own controller to read the data. I can not use RS485 since my controller is using it with other devices. There is no overl...
- Thu May 31, 2012 10:22 am
- Forum: Electric Meters
- Topic: EKM Meter Communication options?
- Replies: 7
- Views: 17370
Re: EKM Meter Communication options?
"Up to 256 EKM-Omnimeters can be daisy chain connected to each EKM Push"
What is an EKM Push? Is this hardware or software?
Wouter
What is an EKM Push? Is this hardware or software?
Wouter
- Fri May 25, 2012 2:05 pm
- Forum: EKM Metering Systems
- Topic: TCP Socket Failed to Connect
- Replies: 2
- Views: 8222
Re: TCP Socket Failed to Connect
Once again... Thanks.
I got it working. In preferences I used "HTTP://192..." Don't know why.
When I switched it to "192.168..." it worked. My mistake.
Wouter
I got it working. In preferences I used "HTTP://192..." Don't know why.
When I switched it to "192.168..." it worked. My mistake.
Wouter
- Thu May 24, 2012 6:53 pm
- Forum: EKM Metering Systems
- Topic: TCP Socket Failed to Connect
- Replies: 2
- Views: 8222
TCP Socket Failed to Connect
I've hooked up the iserial device to my Omni Meter v.3. I can connect to the iserial to on http://192.168.1.125/. I've adjusted the setting as per the instructions. The software is able to read meter 123 - Omni test meter. It sometimes reads the second one. However, I constantly get TCP Socket faile...
- Wed May 23, 2012 5:19 pm
- Forum: Electric Meters
- Topic: Pulse on the 25IDS
- Replies: 5
- Views: 10829
Re: Pulse on the 25IDS
It is 1 and 2. Found it.
Wourwe
Wourwe
- Wed May 23, 2012 4:16 pm
- Forum: Electric Meters
- Topic: Pulse on the 25IDS
- Replies: 5
- Views: 10829
Pulse on the 25IDS
I presume the pulse comes off port 4 and 6?
Wouter
Wouter