Search found 6 matches
- Sat Jan 13, 2024 10:07 am
- Forum: Developers Sandbox - Meter Data
- Topic: Send data without a Push
- Replies: 4
- Views: 30582
Re: Send data without a Push
My current setup has meter, 24V ACDC converter, andino pi with rpi4 inside. That's pretty much it. Enclosure is full. andino pi has the RS422/485 serial interface. Meter is hooked up to that interface. A significant benefit is to be able to access this system remotely by ssh using various interfaces...
- Wed Jan 10, 2024 10:00 pm
- Forum: Developers Sandbox - Meter Data
- Topic: Send data without a Push
- Replies: 4
- Views: 30582
Re: Send data without a Push
I was going to ask the same question ... I looked at push3 and it does seem like a nice pretty box, but I already have a setup which would work without an extra box. Is it possible to push the data from the v4 meter using a simple script? I assume it would need some API key or certificate or somethi...
- Tue Jan 02, 2024 7:25 pm
- Forum: General Discussions
- Topic: EKM Dash iSerial IPv6 connectivity
- Replies: 3
- Views: 6737
Re: EKM Dash iSerial IPv6 connectivity
I ran socat with -v (debug mode) to see the traffic going in and out to the socket. Turns out, when IPv6 socket is listened, no traffic is flowing. IPv4 socket - traffic flows normally. I have set the "meter-home" DNS name in the iSerial address field. When I assign a v4 address - things w...
- Wed Dec 27, 2023 8:37 pm
- Forum: General Discussions
- Topic: EKM Dash iSerial IPv6 connectivity
- Replies: 3
- Views: 6737
EKM Dash iSerial IPv6 connectivity
Hi, I would like to ask about possibility of using IPv6 stack for the iSerial emulation. Script (for IPv4): socat TCP-LISTEN:50000,reuseaddr,fork,max-children=1 file:/dev/ttySC0,raw,b9600,csize=2,nonblock,echo=0 Script (for IPv6): socat TCP6-LISTEN:50000,reuseaddr,fork,max-children=1 file:/dev/ttySC...
- Wed Dec 27, 2023 7:34 pm
- Forum: Developers Sandbox - Meter Data
- Topic: iSerial emulation
- Replies: 1
- Views: 55788
Re: iSerial emulation
socat TCP-LISTEN:50000,reuseaddr,fork,max-children=1 file:/dev/ttySC0,raw,b9600,csize=2,nonblock,echo=0 * number of threads connecting to the serial must be limited to 1, otherwise simultaneous connections will result in garbage. EKM dash hooked up over the networks, without this option - messes up...
- Tue Oct 23, 2018 3:58 pm
- Forum: Developers Sandbox - Meter Data
- Topic: Raspberry Pi and FTDI USB (or Serial)
- Replies: 14
- Views: 72766
Re: Raspberry Pi and FTDI USB (or Serial)
I have a production setup. I used Andino Pi (Raspberry Pi 3 B+ inside, plus RTC, plus RS485 converter, plus Atmel chip). Currently access the meter using RS485 but atmel chip is also capable of counting the impulses. Andino Pi is powered by 12V 2A DC power source, everything is on DIN rail ... I als...