Search found 20 matches
- Sat Jan 20, 2024 5:00 pm
- Forum: EKM Metering Systems
- Topic: iostack Topology in Distributed 485bee Network
- Replies: 1
- Views: 3450
iostack Topology in Distributed 485bee Network
I have read the preliminary information you have on your website about you iostack product in beta. It is interesting since it could cover a lot of additional sensor capability. I am interested in reserching it as a possible addition to my water well monitoring network to add the capability to monit...
- Thu Sep 14, 2023 3:44 pm
- Forum: EKM Metering Systems
- Topic: Concurrent Data Collection Using Push3 and Dash
- Replies: 3
- Views: 35535
Re: Concurrent Data Collection Using Push3 and Dash
Data collection for my purposes is not necessary with a resolution of any less than an hour. Just another thought on this to see if you think it might work. Both Dash and the Push3 gateway have there own 485bees to interface to my network of deployed Xbees. I only need to have Dash collect data from...
- Thu Sep 14, 2023 11:50 am
- Forum: EKM Metering Systems
- Topic: Push 3 Installation Question
- Replies: 10
- Views: 60842
Re: Push 3 Installation Question
Found the problem. I had a couple of bad 485bee modules, one with a defective baseboard, the other with a defective Xbee module. So ended up chasing my tail for awhile.
- Thu Sep 07, 2023 9:02 pm
- Forum: EKM Metering Systems
- Topic: Push 3 Installation Question
- Replies: 10
- Views: 60842
Re: Push 3 Installation Question
I still am unable to move an Omnimeter V.4 from a working Push3 configuration over to a Dash configuratiom running on the COM port of a PC, either hardwired OR using 485bees. The COM port serial protocol defaults to 9600/8/N/1/N (9600 baud, 8 data bits, no parity, 1 stop bit, no flow control). What ...
- Tue Mar 28, 2023 9:40 am
- Forum: EKM Metering Systems
- Topic: Push 3 Installation Question
- Replies: 10
- Views: 60842
Re: Push 3 Installation Question
Thanks Jameson, you have answered all of my questions and it is now clearer how this all works. I can't take any of my Omnimeters down from the production 485Bee network since they are deployed at remote locations and being used on my Dash setup. I have another new Omnimeter V.4 in transit from you ...
- Sun Mar 26, 2023 10:41 am
- Forum: EKM Metering Systems
- Topic: Push 3 Installation Question
- Replies: 10
- Views: 60842
Re: Push 3 Installation Question
From the Push 3 account page, I click on the "account" link in the Meter account key field, the screen that comes up gives me a message "'This account is view-only. Account key is not owned by currently signed in user." Has this got something to do with why I can't read my meters...
- Sun Mar 26, 2023 10:27 am
- Forum: EKM Metering Systems
- Topic: Push 3 Installation Question
- Replies: 10
- Views: 60842
Re: Push 3 Installation Question
In the Dash configuration "Edit" menu tab, there are 3 additional tabs labelled "USB", "iSerial" and "Push". If I look at the USB setting, it is set to the COM port on my PC that the Blink is plugged into. I am not using iSerial. If I look at the "Push&qu...
- Sun Mar 26, 2023 10:17 am
- Forum: EKM Metering Systems
- Topic: Push 3 Installation Question
- Replies: 10
- Views: 60842
Re: Push 3 Installation Question
The other things I am confused about are: In the Dash configuration, the serial# (address) of each Omnimeter is a 9 digit number. In the Push3 account listing, the serial#'s are 12 digits (3 0's leading the serial#). Is this normal or could it cause an issue?? Also, what is the reason for all of the...
- Sat Mar 25, 2023 9:50 am
- Forum: EKM Metering Systems
- Topic: Push 3 Installation Question
- Replies: 10
- Views: 60842
Re: Push 3 Installation Question
Note: The current configuration I use (and that I am trying to migrate from) is working perfectly. It is a 485Bee connected to a COM port on my PC (running Dash) and with a Blink RS-485 to USB converter. So, I know all my radios and Omnimeters are working fine.
- Sat Mar 25, 2023 9:45 am
- Forum: EKM Metering Systems
- Topic: Push 3 Installation Question
- Replies: 10
- Views: 60842
Re: Push 3 Installation Question
I have a 485Bee connected to the RS-485 port on the Push3 but I still cannot read my remote Omnimeter V.4's. The proper serial#s appear in the Push3 Gateway for the gateway and each of the meters. The gateway is connected to the internet and is uploading to the cloud (Internet LED flashes a long gre...