EKM Metering

I had an idea, read lifetime use and compare to the meter reading.

Lifetime reading on encompass = 66,449 gallons (today)
Pic of meter 5 days ago 13,100 cu/ft = 97,995 gallons
I would say the meter is broken.
I checked the water meter setting in encompass and they look fine.

Thoughts?

Unfortunately I cannot see the second dial (the one next to the magnetic dial) of the EKM meter in the first photo. I mentioned the ekm meter x0.1 dial "before" looked like it was pointed at 4. Meter reading: Before 5 gal, I read, 13109.41 After 5 gal, I read, 13100.21 (makes no sense thi...

I finally made it out to the rental to check the suspect water meters. The problem I am seeing is the main water bill that is feeded both units, and the ekm is only connected to the rear is showing the same or sometimes more than the total main water meter reports. My goal was to fill a 5 gal orange...

Please explain what the issue you are seeing is. The ekm water meter is only feeding the rear unit, installed by a professional. So the water bill I get is total use, then I use the ekm water meter to figure out the front/rear unit percentage. Say total bill is $100, and rear uses 40%, I bill the f...

Thanks! Changing the dates is simple and I can get results via email. (would be nice in the app, but no big deal). I changed both water/gas dates and have new readings. Gas seems better now. The issue I still have is: Water bill shows 10CCF and new data adjusted pulse readings shows 9.7CCF for the r...

I am having a couple of issues: I have a duplex and get the single water bill for both units, then I have the pulse meter reading just the rear unit. The problem is, the rear unit is reporting more than the total reading on the bill (see pics). Water bill reported 7480 gal total and pulse meter repo...

Another question:
I have this gas meter:
PGM.75 #40 3/4 Inch Pulse Output Gas Meter - PGM-075
and it says it outputs " 1 Pulse Per Cubic Foot".
The gas bill is in Therms.
Can I just change the widget to therms and It will do the conversion?
TIA!

Hi, Three questions: 1. I got my electric metering going and in encompass I see data/graphs about 2 weeks ago. Yesterday I connected up the water and gas to the Omnimeter and its counting pulses, all good (I see them from the push3 meter online). Now I want to see water and gas used in units/graphs ...

Thanks, nice explanation!

Hi Jameson, thanks for the quick reply.

I am hoping a tenant will have wifi and let us tap in.
I was preparing for the worst

What is the reason a LoRWAN would not work?
(Push3 wifi to esp32, then esp32 sends data out on LoRaWAN to a LoraGateway and now it's on the internet)

Thanks!