Search found 17 matches
- Thu Jan 26, 2017 11:20 am
- Forum: EKM Metering Systems
- Topic: Using DASH to set up EKMOmnimeter
- Replies: 3
- Views: 9494
Re: Using DASH to set up EKMOmnimeter
Thanks for getting back to us, and thanks for the further details and screenshots. This clears it up -- you have the Omnimeter I v.3, while the instructions for setting the display options pertain only to the more advanced Omnimeter Pulse v.4 models. As mentioned in the EKM Dash User Manual on page ...
- Thu Dec 13, 2012 5:48 pm
- Forum: Gas Meters
- Topic: Gas measurement conversion info
- Replies: 0
- Views: 64242
Gas measurement conversion info
You can find a lot of helpful websites covering this. Here is one I found (Note the differences between natural gas and propane below): FROM: http://www.ct.gov/DRS/cwp/view.asp?a=1511&q=267170 "PROPANE" means a gaseous paraffin hydrocarbon, which becomes liquid under pressure or reduce...
- Thu Dec 13, 2012 5:32 pm
- Forum: Gas Meters
- Topic: Gas meter specs
- Replies: 4
- Views: 26080
Gas meter specs
Here is all the data that we have on the gas meter: Size: G4 Dimensions: 10" Tall x 7.5" Wide x 6.5" Deep Or: H225xW201xD165 mm No power source required Casing: Steel Connection Thread: G1 1/4 Thread Distance: 110 mm Direction of inlet: Left in right out Reed Switches: oki-ord324 Reed...
- Mon Oct 29, 2012 10:22 am
- Forum: Water Meters
- Topic: Installing a meter reading system
- Replies: 17
- Views: 45177
Re: Installing a meter reading system
Torch-12,
Thanks for the OmniMeter Pulse!
The default password for the meters is "0" ("zero", without the parentheses).
Thanks,
Seth
Thanks for the OmniMeter Pulse!
The default password for the meters is "0" ("zero", without the parentheses).
Thanks,
Seth
- Mon Sep 24, 2012 1:40 pm
- Forum: EKM Metering Systems
- Topic: iSerial Read Data Error
- Replies: 24
- Views: 55183
Re: iSerial Read Data Error
A and A+, as well as B and B- are interchangeable.
Thanks!
Thanks!
- Wed Sep 19, 2012 4:20 pm
- Forum: Other Meters
- Topic: Actual Engine Fuel (Diesel/petrol) Consumption Meter?
- Replies: 1
- Views: 19342
Re: Actual Engine Fuel (Diesel/petrol) Consumption Meter?
Thanks for considering us for this!
At this time we are focusing on water, gas (in a gaseous form...) and electricity for our meters. You may want to search elsewhere for liquid diesel/petrol/gasoline consumption meters.
Thanks,
Seth
EKM Metering
At this time we are focusing on water, gas (in a gaseous form...) and electricity for our meters. You may want to search elsewhere for liquid diesel/petrol/gasoline consumption meters.
Thanks,
Seth
EKM Metering
- Thu Sep 13, 2012 10:03 am
- Forum: EKM Metering Systems
- Topic: V3 download
- Replies: 1
- Views: 6607
Re: V3 download
Yes this is correct. If you purchased the software from us in the past just let us know you want the EKM Dash and we can offer you the FULL paid latest version. Send an email with your identifying info so we can look up your original order to: info@ekmmetering.com
Thanks!
Thanks!
- Tue Sep 11, 2012 1:46 pm
- Forum: Electric Meters
- Topic: Use in other countries (compliant), data options
- Replies: 1
- Views: 7618
Re: Use in other countries (compliant), data options
Thank you for your interest in our meters. We do recommend our EKM-Omnimeter for your needs. Regarding specific local approval I would not know, although I do know that Australia is probably maybe our 2nd or 3rd biggest user of our metering products outside of the USA. This meter uses external CTs (...
- Wed Apr 04, 2012 4:16 pm
- Forum: EKM Metering Systems
- Topic: EKM Reader Software issues?
- Replies: 6
- Views: 15286
Re: EKM Reader Software issues?
Francesco, There are a few issues to be addressed here. (Just so you know we are currently having the software rewritten so if any of these issues are on the software end they should go away when that happens.) Since you are not using one of our converters we cannot guarantee that it will work. I ha...
- Wed Mar 28, 2012 2:38 pm
- Forum: EKM Metering Systems
- Topic: ekm logo
- Replies: 1
- Views: 7007
Re: ekm logo
(See reply under General Discussions section of this forum. Thanks!)