Search found 13 matches

by vdoshi
Sat Sep 29, 2012 12:55 am
Forum: EKM Metering Systems
Topic: iSerial Read Data Error
Replies: 24
Views: 23855

Re: iSerial Read Data Error

Hi Jameson, I've check the connections multiple times this morning and I've tried to set the meter number to 999999999999, but I still get the same result. I confirmed that the ACT light is blinking about once every 5 seconds, the LINK light is blinking continuously and the POWER light is on all the...
by vdoshi
Fri Sep 28, 2012 2:21 am
Forum: EKM Metering Systems
Topic: iSerial Read Data Error
Replies: 24
Views: 23855

Re: iSerial Read Data Error

Hi Jameson, I'm using Dash version 0.0.0.321. I have only one meter connected to the iSerial device. When I tried to discover the meter address, it tells me that it is unable to discover the meter number, please try again. Below is the output from the hex editor: Meter Number: 10001284 Meter Model: ...
by vdoshi
Thu Sep 27, 2012 2:40 pm
Forum: EKM Metering Systems
Topic: iSerial Read Data Error
Replies: 24
Views: 23855

Re: iSerial Read Data Error

Hi Jameson,
Thanks for your comments. I will check tomorrow morning and post the results.
by vdoshi
Thu Sep 27, 2012 5:55 am
Forum: EKM Metering Systems
Topic: iSerial Read Data Error
Replies: 24
Views: 23855

Re: iSerial Read Data Error

Hi,
I tried setting the meter and iSerial device in a different setup.
I still get the same error, but now I noticed that the ACT ligh is flashing about once every 5 seconds or so. The EKM Dash software still shows the Read Regular Data Error.
by vdoshi
Thu Sep 27, 2012 5:25 am
Forum: EKM Metering Systems
Topic: iSerial Read Data Error
Replies: 24
Views: 23855

Re: iSerial Read Data Error

By the way, I'm using the EKM Dash software and not the EKM Reader software.
by vdoshi
Thu Sep 27, 2012 5:23 am
Forum: EKM Metering Systems
Topic: iSerial Read Data Error
Replies: 24
Views: 23855

Re: iSerial Read Data Error

Hi, I have confirmed the IP address. Additionally, I'm testing it on a second network setup without any port blocking. I am also able to reach the iSerial configuration menu using the same IP. When the Dash software polls the meters, the link light is flashing which tells me that traffic is flowing ...
by vdoshi
Thu Sep 27, 2012 5:15 am
Forum: EKM Metering Systems
Topic: iSerial Read Data Error
Replies: 24
Views: 23855

Re: iSerial Read Data Error

Hi,
I have some doubts on the DIDO settings of the iSerial device. Please find a screen shot of the same. Please let me know if these setting are correct?
Thanks,
by vdoshi
Wed Sep 26, 2012 2:10 pm
Forum: EKM Metering Systems
Topic: iSerial Read Data Error
Replies: 24
Views: 23855

Re: iSerial Read Data Error

Dear Jameson, Thanks for your comments. The ACT light is not flashing, but if the connection is made correctly, do you have any suggestions as to why the meter would not be sending data to the iSerial device? As mentioned earlier, the cable length is about 12 meters. would this cause a problem? In t...
by vdoshi
Wed Sep 26, 2012 2:24 am
Forum: EKM Metering Systems
Topic: iSerial Read Data Error
Replies: 24
Views: 23855

Re: iSerial Read Data Error

Hi Guys, Thanks for your comments. I'll try terminating all the meters are the iSerial device and I'll try increasing the meter reading to "as fast as possible". In the mean time, attached are some pictures of my physical connection. Just a note, the distance between the iSerial device and the first...
by vdoshi
Tue Sep 25, 2012 7:21 am
Forum: EKM Metering Systems
Topic: iSerial Read Data Error
Replies: 24
Views: 23855

Re: iSerial Read Data Error

Hi,
Please find attached the screenshots of the UART Setup screen, the EKM Meter setup and the EKM Dash. I will post the images of the physical wiring as soon as possible.
Thanks,

Vishal