EKM Metering

Hi, We use Ominmeter v3 for meter reading. We connect meter to get reading of 3 wire 400V as per the ekm manual. We used 2 nos. CTs (1500 A). Issues: As per your instruction; for 3 wire meter reading using 2 CTs and we are getting amps reading for L1 and L3 only. We need amps reading for 3 phases L1...

HI, Thanks for the reply. We have checked all the wiring for CT and power and it seem alright. We have changed CT #2 (L3) and we could read the amps for L3 :D as well as voltage for L1, L2, L3 :D We have changed the CT ratio as per the requirement. The problem that we are facing is that we are getti...

Thanks for the reply, I would like to inform you that the voltage range is 380-400V. (3 wire/ 3phase system without neutral) 1. L1 is showing voltage on meter, L3 is not showing voltage 2. L1 is showing amps on meter, L3 is not showing amps 3. L1 is showing power (Watts) on meter, L3 is not showing ...

Hii, I m using EKM Omnimeter V3 for meter reading with the ekm dash trial version as the software. When I connect locally to the device, it is giving me read data error.(used RS 485 convert with COM port) The line is 415V 3-phase 3 wire. The meter was connected with 2 CTs (SCT-100-1500, 1500A: 26.6m...

Hi, I am using Omnimeter I v.3 and Iserial v.2 for reading KWH. I am able to get the reading in EKM dash when i connects the device locally within the network. But i m facing an issue when i try to use the remote connection settings. I have changed the hostname to our company dyndns hostname and als...