EKM Metering

If I take the meter out and leave the cts installed I should terminate them with a small value resistor. Your spec sheet showed a burden of 5 ohms. I looked in my SOS (Stash of stuff) box and found a couple of 10 ohm 10 watt resistors. For the benefit of others that may need to remove a meter and l...

PVOutput will now accept EKM Omnimeter V.3 as a Secondary Device as well as a Primary device. This will benefit any users that wish to upload data directly to PVOutput using any Primary Device listed - Flukso, COSM, Enphase, Weather, TED5000, Wattvision, WebBox, EKMMeter and wishing to add an EKM Om...

Here is a link to an EKM PUSH feed to PVOutput.org displaying Consumption, Generation & Voltage using 2 meters - 1 for Consumption & 1 for Generation: http://pvoutput.org/intraday.jsp?id=15051&sid=12913

I am not sure if you have noticed that there is a Shameless Plugs section, the forum owners appear not to have an issue on plugging a product, so what exactly is your issue!!! Yes I did and was actually wondering why you didn't take your own adice and post in that area rather than HiJacking several...

ePower I can't see what your post has to do with the EKM PUSH system as the thread title implies, your post is totally OFF TOPIC. I noticed that you already posted about this software elsewhere in this forum but have not indicated if your offering is OSX, Linux or PC based, will it need a computer a...

For those who are using the EKM PUSH and uploading to the http://collector3.ekmmetering.com server you are now able to relay your Power "P" data to the PVOutput.org website using the Auto Uploader Service for EKM Meters. This will give you graphical representation of your Power data for ei...