Search found 56 matches

by BlueHornet
Sun Aug 10, 2014 1:58 pm
Forum: Electric Meters
Topic: default pulse counting ratio on v.4 Omnimeter
Replies: 1
Views: 5015

Re: default pulse counting ratio on v.4 Omnimeter

Pulse Ratio for 1, 2 & 3 are each set to 1000:1 by default.
by BlueHornet
Thu Aug 07, 2014 3:02 pm
Forum: EKM Metering Systems
Topic: How do I best set up the Time-of-Use options?
Replies: 56
Views: 78653

Re: How do I best set up the Time-of-Use options?

Hi Karl,

As a matter of interest what is your V3 meter number and do you have any co-generation?

Cheers,
Gary
by BlueHornet
Thu Aug 07, 2014 1:55 pm
Forum: EKM Metering Systems
Topic: How do I best set up the Time-of-Use options?
Replies: 56
Views: 78653

Re: How do I best set up the Time-of-Use options?

Hi Karl & Jameson, I may have solved my own issue regarding my TOU registers not activating correctly as per the allocated weekday and weekend schedules, I will conduct further testing to establish that this is 100% correct but in the meantime this what I have determined. Irrespective of whether...
by BlueHornet
Wed Aug 06, 2014 1:28 am
Forum: EKM Metering Systems
Topic: How do I best set up the Time-of-Use options?
Replies: 56
Views: 78653

Re: How do I best set up the Time-of-Use options?

And here are the Holiday Schedule Screen Shots
by BlueHornet
Wed Aug 06, 2014 1:24 am
Forum: EKM Metering Systems
Topic: How do I best set up the Time-of-Use options?
Replies: 56
Views: 78653

Re: How do I best set up the Time-of-Use options?

Not sure what these are going to tell you that I haven't already described but here are the screen shots you requested, and just as a matter of interest I tried the Holidays Schedules and they too do not override the Schedule 1 settings and the meter continues to accumulate TOU registers according t...
by BlueHornet
Tue Aug 05, 2014 3:52 pm
Forum: EKM Metering Systems
Topic: How do I best set up the Time-of-Use options?
Replies: 56
Views: 78653

Re: How do I best set up the Time-of-Use options?

I am stumped, and now believe to have the same problem, contrary to what I thought. Hi Karl & Jameson, In an attempt to be clear about the Schedules & Weekend Schedule and TOU registers behavior I am experiencing. DASH can certainly set the Schedule times and the weekend schedule in the met...
by BlueHornet
Sun Aug 03, 2014 2:58 pm
Forum: EKM Metering Systems
Topic: How do I best set up the Time-of-Use options?
Replies: 56
Views: 78653

Re: How do I best set up the Time-of-Use options?

Hi Karl and thank you for your input. I posted the message in a hurry and realise now that I left out some information that would be important as well as some misleading information. The T2 schedules that wont work are only for the weekends - in other words the weekend rate continues to behave like ...
by BlueHornet
Sun Aug 03, 2014 1:02 am
Forum: EKM Metering Systems
Topic: How do I best set up the Time-of-Use options?
Replies: 56
Views: 78653

Re: How do I best set up the Time-of-Use options?

I'm particularly interested in this thread as I have not been able to set up my TOU correctly using DASH! I can't seem to get my head around how they work in DASH, even following the screen shots Jameson sent me (see below) which I have copied exactly (with the exception of correcting the Schedule 2...
by BlueHornet
Thu Apr 24, 2014 5:41 pm
Forum: Developers Sandbox - Meter Data
Topic: How to detect/measure reverse energy flows
Replies: 7
Views: 31231

Re: How to detect/measure reverse energy flows

Just another thought on the v.3 and the reverse current flows. I wonder if it might an easy matter (for you :D ) to revise the meter's firmware so that a negative power flow shows a power factor of minus 1, because showing plus 1 is theoretically not correct when there is a phase difference of 180 ...
by BlueHornet
Mon Mar 24, 2014 12:40 pm
Forum: EKM Metering Systems
Topic: EKM PUSH Gateway has failed?
Replies: 5
Views: 23132

Re: EKM PUSH Gateway has failed?

As a matter of interest, I have one of the earliest versions of the PUSH gateway (sitting in a cupboard) in a black box with only some port & LED labels but no branding or firmware revisions. Can the firmware for this be reflashed and serve as a spare if I were to send them together?