EKM Metering

Hi Ed, Please send us as much information as you can. iSerial Settings Screenshots: EKM Dash settings screenshots: Photos of your installation (including the data wires entering your iSerial and your meter): The meter number you are using: Does the ACT light on the iSerial flash once every 5 seconds...

Bill, Glad you like the looks of the EKM-Omnimeter Pulse v.4! 8-) This meter does come with a load of new features that really open up a world of possibilities. Yes, this meter has separate kWh registers for each line, so yes you can have a 120 volt 2-wire load on each of the 3 lines and get back bo...

Hello Ed, There are a couple things you need to be sure of first: 1. Please make sure you are running the latest version of the EKM Dash. And make sure you have EKM-Omnimeter Pulse v.4 selected in the "Meter Model" when setting up a new meter. 2. The iSerial needs to be changed internally ...

SolarSentry, The ideal way to disconnect your meters from your CTs is to turn off all loads in the Primary Wire (the wire the CT is measuring), so that there is NO current in the Primary Wire. Then simply short the White CT wire to the Black CT wire. You can use a wire nut or an EKM Lever Nut to do ...

Maxim, We do not have a ready made solution to do exactly what you want at this time (for now you would need a computer to be running to implement this task). You could do this in a few ways: 1) Develop a microcontroller, raspberry pi, or Arduino type solution: This board that you develop could read...

Here is a link to our EKM-Omnimeter I v.3: http://www.ekmmetering.com/ekm-metering-products/electric-meters-kwh-meters/smart-meters-read-meter-remotely-automatically/ekm-omnimeter-i-v-3-3-phase-3-wire-or-4-wire-120-to-480v-50-60hz-single-phase-2-or-3-wire-120v-to-480v-50-60-hz.html Any of our CTs (c...

Hello Maxim, To meter just one circuit of 230 volts 50Hz (we would consider this a foreign 230 volt 2-wire system) you will need just one EKM Omnimeter and 1 CT. For a wiring video of 1 EKM Omnimeter and 1 CT please see this video: http://www.ekmmetering.com/information/the-complete-guide.html#answe...

Maxim, Here is a link to the Omnimeter v.3 meter RS485 protocol: http://documents.ekmmetering.com/Meter_Communication_Parsing_Submeter_v3.pdf This protocol includes watts, kilowatt hours, and a host of other metered parameters. The EKM Dash comes with a free 30 day trial, the full version is $30. He...

Hello Maxim! Welcome to the forum! :!: Yes, we would be happy to help you in any way that we can. We have meters that can measure any common electrical system in the world. Please let us know more about your electrical, water, or gas metering system. Our EKM Omnimeter can be read as often as once ev...

SolarSentry, thank you for the link to the Consumption and Generation feed. We have come up with a little tutorial to help EKM Push users configure their PVOutput.org account. Here is a link to the .pdf file: http://documents.ekmmetering.com/How-to-add-an-Omnimeter-v.3-and-an-EKM-Push-to-PVoutput.or...