No mater what I do, when I now open any version on Dash I get a little screen in the upper left corner of my desk top.
DASH main screen will not run.
Running W7 single screen
Previous versions used to run OK
Now none of them work.
Is some left over file starting to run when I try to load Dash ?
Search found 65 matches
- Wed Dec 19, 2012 12:02 am
- Forum: EKM Metering Systems
- Topic: Dash Crash Help !
- Replies: 4
- Views: 9564
- Tue Dec 18, 2012 2:02 pm
- Forum: EKM Metering Systems
- Topic: Dash Crash Help !
- Replies: 4
- Views: 9564
Dash Crash Help !
Up graded to Dash 4.25 It was working Ok Called up the data inspector and tried to reset the resettable KWH register. The register did reset but I didn't see the data inspector results. I exited the Pgm Probably using the red button upper left. The main program closed leaving the unseen data inspect...
- Sat Dec 08, 2012 2:33 am
- Forum: Electric Meters
- Topic: Data Error ?
- Replies: 2
- Views: 6679
Data Error ?
Meter V4
Dash Ver 405
When I go to "Data" to recover my previous month's TOU readings they seem to off by a factor of 10. (to high)
Bill
Dash Ver 405
When I go to "Data" to recover my previous month's TOU readings they seem to off by a factor of 10. (to high)
Bill
- Mon Nov 12, 2012 1:27 pm
- Forum: Electric Meters
- Topic: v4 First look
- Replies: 8
- Views: 15989
Re: v4 First look
Please explain "Devise Signature"
Just how are VARs derived.? Wikipedia was not much help.
Bill
Just how are VARs derived.? Wikipedia was not much help.
Bill
- Sun Nov 11, 2012 6:17 pm
- Forum: Electric Meters
- Topic: v4 First look
- Replies: 8
- Views: 15989
Re: v4 First look
Thanks for the the info. I did not find the "Total Forward KWH" on the parceing page. Did I miss it, or is it calculated, if so from what ? Not sure what KVARs are How measured? :idea: Just thought of a neat thing, I think I can now do. If the genni goes outside of my predetermined limits ...
- Fri Nov 09, 2012 6:35 pm
- Forum: Electric Meters
- Topic: v4 First look
- Replies: 8
- Views: 15989
Re: v4 First look
It's installed and working with Dash .383 Is protocol available like the v3 ? Yes I have plans for the outputs. I think I can add a dummy load to the genni and test it remotely. How about this: Install a couple of relays to switch ct's and volts to a difference source. Install a third ct so you can ...
- Fri Nov 09, 2012 3:04 am
- Forum: Electric Meters
- Topic: v4 First look
- Replies: 8
- Views: 15989
v4 First look
New meter arrived today. !Wow! I am impressed. :o Read every word I could find on it. Can't wait to get it installed and run it through it's paces. My imagination is running amuck and I keep thinking of neat things that I could due with it. 1st question Could I monitor 3 separate items like Freezer,...
- Thu Nov 01, 2012 1:19 pm
- Forum: Electric Meters
- Topic: Total KWHs
- Replies: 0
- Views: 51502
Total KWHs
Will some one please tell me the reason that total KWH shown on the meter (forward and reverse) are not added Algebraically. The result displayed it the absolute value (algebraically subtracted). I cannot imagine what use this figure is, or why it is needed. Can it be changed to show net KWhs ? Bill
- Mon Oct 22, 2012 11:15 pm
- Forum: Electric Meters
- Topic: EKM Not tracking Utility Smart meter
- Replies: 13
- Views: 37295
Re: EKM Not tracking Utility Smart meter
I checked today to see if the line 2 ct got connected to line 1 input. It isn't. Up untill now now I had regretted paying extra for the open-able cts. Installed them in the output of my transfer switch. Never had a call to move them. If I take the meter out and leave the cts installed I should termi...
- Sun Oct 21, 2012 12:04 am
- Forum: Electric Meters
- Topic: EKM Not tracking Utility Smart meter
- Replies: 13
- Views: 37295
Re: EKM Not tracking Utility Smart meter
Questions What would be the results if: One of the arrow labels was installed incorrectly. Mine are both pointing to the load. Have you ever seen this particular problem before ? We are getting the first storm of the season. This is the time I will need the EKM to monitor the generator's output. I w...