Ed,
Here are the SMTP settings that we use for testing the EKM Dash email functionality:
SMTP Server: smtp.gmail.com
SMTP Username: ekmmeter@gmail.com
SMTP Password: ********
Server Port: 587
Hope this helps,
Search found 862 matches
- Tue Dec 18, 2012 10:33 am
- Forum: Electric Meters
- Topic: New v4 Meter Read Regular Data Error
- Replies: 12
- Views: 20472
- Sun Dec 16, 2012 1:47 pm
- Forum: EKM Metering Systems
- Topic: Omnimeter amps and volt reading
- Replies: 1
- Views: 5552
Re: Omnimeter amps and volt reading
Hello Vishnu, It sounds like you have an Omnimeter I v.3 connected to a 3-phase 3-wire system. Did you use this wiring diagram? (including the jumper from port 8 to port 10): http://www.ekmmetering.com/information/the-complete-guide.html#answer7 The only way to properly meter a 3-phase 3-wire system...
- Wed Dec 12, 2012 3:18 pm
- Forum: Electric Meters
- Topic: relay output activation
- Replies: 1
- Views: 4932
Re: relay output activation
Hello Pablo, Welcome to the forum! Can i program the Relay outputs as an alarm? I.E. if measured kW it's above 10kW activate the relay output. You cannot program the meter itself to do this by itself as a standalone unit. But the software (like the EKM Dash) that is used to read the meter could do t...
- Mon Dec 10, 2012 6:52 pm
- Forum: EKM Metering Systems
- Topic: Dash Locks up and can't be closed
- Replies: 12
- Views: 20566
Re: Dash Locks up and can't be closed
Hello Kevin,
We are not able to recreate this problem.
Will you let us know the specific steps we need to take to recreate the issue you are seeing? It sounds like a rare case.
Thanks for your help with this.
We are not able to recreate this problem.
Will you let us know the specific steps we need to take to recreate the issue you are seeing? It sounds like a rare case.
Thanks for your help with this.
- Mon Dec 10, 2012 6:49 pm
- Forum: Electric Meters
- Topic: New v4 Meter Read Regular Data Error
- Replies: 12
- Views: 20472
Re: New v4 Meter Read Regular Data Error
Ed,
Is there any way you can email us the SMTP settings you are using (you dont have to include the password). We can take a look at them and let you know if anything pops out.
Regards,
Is there any way you can email us the SMTP settings you are using (you dont have to include the password). We can take a look at them and let you know if anything pops out.
Regards,
- Mon Dec 10, 2012 6:47 pm
- Forum: Electric Meters
- Topic: Data Error ?
- Replies: 2
- Views: 6677
Re: Data Error ?
Wooops!
We will look into it and will include a fix in the next release. This has to do with us putting the decimal in the wrong place.
Thanks for pointing this out!
Best regards,
We will look into it and will include a fix in the next release. This has to do with us putting the decimal in the wrong place.
Thanks for pointing this out!
Best regards,
- Fri Dec 07, 2012 3:00 pm
- Forum: EKM Metering Systems
- Topic: Connecting EKM Push to 2 each single phase 400 amp services
- Replies: 1
- Views: 5104
Re: Connecting EKM Push to 2 each single phase 400 amp servi
If you have 2 EKM Omnimeters you will only need 1 EKM Push gateway to connect to both of your meters. You can have up to 256 EKM Omnimeters connected to 1 EKM Push gateway. The data will come in as 2 separate streams each pertaining to it's own meter number. In our sample case 10068 and 10054 are 2 ...
- Fri Dec 07, 2012 1:37 pm
- Forum: EKM Metering Systems
- Topic: EKM Push Timeline
- Replies: 3
- Views: 8002
Re: EKM Push Timeline
The EKM Push gateway automatically reads your meters and sends the data to a cloud based server cluster (there is not much data that is stored on the EKM Push gateway itself). The latest 1000 meter reads are stored on this server cluster. It is then very easy for you to retrieve these meter reads fr...
- Fri Dec 07, 2012 11:40 am
- Forum: Developers Sandbox - Meter Data
- Topic: Setting Pulse output constant
- Replies: 3
- Views: 9211
Re: Setting Pulse output constant
Here is the section you will want to focus on for setting the "Settable Pulse Output Ratio" Set Imp/kWh Constant. Example: Settable impulse constant to 20 Imp/kWh 01 57 31 02 30 30 44 34 28 30 30 32 30 29 03 05 6b Blue is the Parameter you want to set, Green is the Setting you will make. T...
- Fri Dec 07, 2012 10:03 am
- Forum: Developers Sandbox - Meter Data
- Topic: Setting Pulse output constant
- Replies: 3
- Views: 9211
Re: Setting Pulse output constant
The EKM-Omnimeter Pulse v.4 has a "regular pulse output" as well as a "settable pulse output". Say you wanted it to pulse 1 time per kWh (rather than the 800 per kWh that the regular pulse output does) You can set this just like you set other settings in the meter. We have not ye...