EKM Metering

Hello Cogilvie58, Glad you got the wiring sorted out. Please verify that you have an Omnimeter Pulse v.4. (rather than a v.3 Omnimeter) This is the only meter we carry that has the ability to keep track of kilowatt hours on each line separately. You can see all of the values the Omnimeter Pulse v.4 ...

Hello Jens, Thank you very much for these ideas. I would say that these are exactly the kind of features that we are looking to implement in the future, but we do not have them right now. All we have in the Dash so far as control is concerned is ON, OFF, ON for 1 to 9999 seconds, and OFF for 1 to 99...

Hello Arima, It sounds like you would like to reset the Meter's recorded kWh to zero. This is not possible with our meters. In order to provide revenue grade metering and to prevent tampering, we cannot reset the "Total kWh" to zero. Our new Omnimeter Pulse v.4 has a "Resettable kWh&q...

Yes, you should be fine if you have 2 CTs on line 1 and 2 CTs on line 2. Make sure that you have them wired to the meter in parallel (not in series). This is used if you have multiple wires which will not fit through one CT that you want to meter. You are correct that all line1 wires must be from Li...

Hey Phase90, I would have to say that sounds correct, but I am not well versed in these things. I think the best will be to try it out. I should probably have said "27VDC max" I am certain your 3.3or 5 VDC will work and will not harm the meter. Our 6 Digit Pulse Counter has a small 1.5V ba...

Hello noisette123 and welcome to the forum. I would say that it would be possible to use your CTs with our meter provided that you will not be very accurate and I would not load them to full 100 amps. Our meters are designed to measure the 26.6mA output of our CTs, so you will not want to exceed thi...

Hello Phase90, Welcome to the forum! The Pulse Output of all of our meters (including the 25IDS) is an un-powered "dry contact" closure (though solid state). Electrically the Pulse Output is very similar to the closing of a dry contact switch. The only difference is that in this case the o...

Hello Ian, Welcome to the Forum. Glad to hear you like the widget! :lol: We use UTC (Coordinated Universal Time) or GMT for the widget. Here is some more information about UTC Time: http://en.wikipedia.org/wiki/Coordinated_Universal_Time https://www.google.com/search?q=utc+time We will look into see...

You may have noticed that we have a new version of the widget that is a major improvement over the first one. Here is the widget for the latest 1000 reads, from Omnimmeter 10068, with EKM Push Key MTAxMDoyMDIw http://widget.ekmmetering.com/EKM2/?reads=1000&key=MTAxMDoyMDIw&meter=10068 If you...

Hello whenao80, Welcome to the forum. The "Basic" Meter you have will only display "Total Kilowatt Hours". This is the total amount of energy that has been measured by the meter since it was installed. To determine how much energy has been used for a month you will have to subtra...