Search found 860 matches

by Jameson
Wed Jan 17, 2024 9:36 am
Forum: General Discussions
Topic: Space in EKM0303015 UL Enclosure
Replies: 1
Views: 1725

Re: Space in EKM0303015 UL Enclosure

Yes, you should be able to fit all of that equipment in the XL enclosure. This attached image shows an XL 303015 enclosure, with 3 x Omnimeter Pulse v.4, 1 x DIN rail power supply, 1 x EKM Push3 gateway, and 1 x RUT240 Cellular modem installed inside, you should have space to run the CAT5 cables and...
by Jameson
Fri Jan 12, 2024 9:47 am
Forum: Developers Sandbox - Meter Data
Topic: Send data without a Push
Replies: 4
Views: 24147

Re: Send data without a Push

The only way for meter data to get into the Push cloud system is via a Push3 that is assigned to your meter. It would be quite a headache to support incoming data from a variety of computers/gateways/3rd party meters/anomalous data/etc So that is why we lock it down in this way. And yes, on top of t...
by Jameson
Fri Jan 12, 2024 9:36 am
Forum: General Discussions
Topic: EKM Dash iSerial IPv6 connectivity
Replies: 3
Views: 3811

Re: EKM Dash iSerial IPv6 connectivity

Very interesting. We will put it in the hopper for Dash development. Thank you for the explanation.
by Jameson
Mon Jan 01, 2024 4:59 am
Forum: General Discussions
Topic: EKM Dash iSerial IPv6 connectivity
Replies: 3
Views: 3811

Re: EKM Dash iSerial IPv6 connectivity

Im sorry, this is quite a ways out of my wheelhouse. Im not sure if the iSerial supports IPV6 or not. I suspect not, because it is such a simple device. I tried searching the web for: ATC-1000 "ipv6" ATC-1200 "ipv6" but did not come up with anything definitive. We have stopped se...
by Jameson
Wed Dec 20, 2023 3:40 am
Forum: EKM Metering Systems
Topic: options to get the push3 data to the internet
Replies: 4
Views: 18750

Re: options to get the push3 data to the internet

What is the reason a LoRWAN would not work? (Push3 wifi to esp32, then esp32 sends data out on LoRaWAN to a LoraGateway and now it's on the internet) In theory someone could develop a device that would read EKM Omnimeters, parse the data, and make it available over LoRaWAN. This device could send t...
by Jameson
Sat Dec 16, 2023 2:13 pm
Forum: EKM Metering Systems
Topic: options to get the push3 data to the internet
Replies: 4
Views: 18750

Re: options to get the push3 data to the internet

Hello --Oz--, welcome to the forum! Here are the options as I see them for how to connect your Push3 to the internet (in order of lowest cost) 1. Ask your tenant or your neighbor if you can connect the Push3 gateway to their wifi (or come to an arrangement if you have to). The Push3 has built in wif...
by Jameson
Thu Nov 30, 2023 4:40 am
Forum: EKM Metering Systems
Topic: EKM-Omnimeter-I-v3-Install Question
Replies: 2
Views: 20507

Re: EKM-Omnimeter-I-v3-Install Question

To our knowledge here are the possible ways that you could install an Omnimeter on a system and get accurate measurements. See the 5 possible electrical systems here: https://help.ekmmetering.com/support/solutions/folders/6000200176 If you have a single phase 3-wire system with 2 hots and a neutral,...
by Jameson
Sun Sep 24, 2023 1:39 am
Forum: EKM Metering Systems
Topic: Concurrent Data Collection Using Push3 and Dash
Replies: 3
Views: 33658

Re: Concurrent Data Collection Using Push3 and Dash

Yes, that should work. When the Push3 is unpowered you could still read your Omnimeters with the USB converter. You could play with the timing of the outage to find something that would work for you. You could even use the Omnimeter Pulse v.4 and the EKM Push3 trigger function to run the timing. Jus...
by Jameson
Fri Sep 08, 2023 5:45 am
Forum: EKM Metering Systems
Topic: Push 3 Installation Question
Replies: 10
Views: 57674

Re: Push 3 Installation Question

The serial settings of a v3 and v4 Omnimeter are 9600 baud, 7 data bits, even parity, 1 stop bit, no flow control:

https://documents.ekmmetering.com/Meter ... ter_v3.pdf
https://documents.ekmmetering.com/Omnim ... arsing.pdf
by Jameson
Wed Aug 30, 2023 3:39 am
Forum: EKM Metering Systems
Topic: Data missing due to internet outage
Replies: 1
Views: 38196

Re: Data missing due to internet outage

If you have a Push3 gateway, it should be storing the data to the SD card during the time that the internet was down. Once the internet is reconnected it can take many hours to upload all of the data from the time of the outage. If this is not working properly, then I would suspect that there is som...