Decommissioned Push System

General questions and discussions focused around the EKM Metering System. Discuss your meters, installations, and meter communications here.
Post Reply
tremors834
Posts: 9
Joined: Wed Mar 13, 2013 6:33 am

Decommissioned Push System

Post by tremors834 » Tue Sep 29, 2020 4:11 pm

Hi,
I no longer plan on using the EKM Push & Encompass system.
Anything I need to do other than disconnect the wires to the PUSH box?
The system has served its purpose well but I have no plans on going back to it.
Thank you.

Jameson
Posts: 787
Joined: Fri Nov 04, 2011 7:42 pm
Location: Santa Cruz, CA
Contact:

Re: Decommissioned Push System

Post by Jameson » Tue Oct 13, 2020 2:02 am

Glad to hear you got what you needed!

If you just disconnect the EKM Push gateway from either power or from the internet, that should be all you need to do. It will stop sending data to the internet.

If you want to sell your EKM Push to a 3rd party, please provide them with the EKM Push MAC address, meter numbers and your EKM Push key, so that we can more easily setup the new owner with their own Push system. Better yet, send us an email with the above details authorizing the new user (including their email address) to have access to the Push.
Jameson
EKM METERING
http://www.ekmmetering.com
831.425.7371

tremors834
Posts: 9
Joined: Wed Mar 13, 2013 6:33 am

Re: Decommissioned Push System

Post by tremors834 » Sat Oct 17, 2020 4:33 pm

Thank you !

Post Reply