EKM Push

General questions and discussions focused around the EKM Metering System. Discuss your meters, installations, and meter communications here.
stishsun
Posts: 5
Joined: Fri May 24, 2013 2:55 pm

Re: EKM Push

Post by stishsun » Fri May 24, 2013 2:59 pm

Jameson,
Please give us an update on integrating EKM Omnimeter Pulse v.4 into the EKM Push system.
My system is all set up and ready for this last piece.

Thank you,

Horace

Jameson
Posts: 764
Joined: Fri Nov 04, 2011 7:42 pm
Location: Santa Cruz, CA
Contact:

Re: EKM Push

Post by Jameson » Fri May 24, 2013 3:26 pm

Still not there :cry:

Im going to back off of making a prediction at this point, as I think I have been jinxing myself. Soon I hope.

Regards,
Jameson
EKM METERING
http://www.ekmmetering.com
831.425.7371

Kailua
Posts: 16
Joined: Mon Feb 18, 2013 10:54 pm

Re: EKM Push

Post by Kailua » Sun May 26, 2013 4:01 pm

Jameson,

Oops, I didn't see the message posted Friday...

David

Kailua
Posts: 16
Joined: Mon Feb 18, 2013 10:54 pm

Re: EKM Push

Post by Kailua » Sat Aug 03, 2013 9:02 am

Jameson,

Another 2 months have gone by, how is the progress on on integrating EKM Omnimeter Pulse v.4 into the EKM Push system coming?

David

Jameson
Posts: 764
Joined: Fri Nov 04, 2011 7:42 pm
Location: Santa Cruz, CA
Contact:

Re: EKM Push

Post by Jameson » Mon Aug 05, 2013 9:05 am

Still working on it. My mistake for grossly miscalculating the time this would take. :oops:
Jameson
EKM METERING
http://www.ekmmetering.com
831.425.7371

xAPPO
Posts: 14
Joined: Tue Nov 20, 2012 5:24 am

Re: EKM Push

Post by xAPPO » Tue Nov 05, 2013 2:57 am

Any news here on V4 support ?

It really does seem to be taking forever now.

Jameson
Posts: 764
Joined: Fri Nov 04, 2011 7:42 pm
Location: Santa Cruz, CA
Contact:

Re: EKM Push

Post by Jameson » Tue Nov 05, 2013 10:19 am

Still :oops: :oops:

The biggest tidbit of news I have for you is that we are working on it. We have Pushes reading v4 meters in our lab, but it is not ready for prime time. Testing, testing, and more testing. :|

So close, but still not close enough for me to throw out a guess as to when it will be ready. Sorry I cannot give you something with a bit more meat on it for now.

Thanks,
Jameson
EKM METERING
http://www.ekmmetering.com
831.425.7371

Kailua
Posts: 16
Joined: Mon Feb 18, 2013 10:54 pm

Re: EKM Push

Post by Kailua » Mon Apr 14, 2014 3:24 am

Update?

Jameson
Posts: 764
Joined: Fri Nov 04, 2011 7:42 pm
Location: Santa Cruz, CA
Contact:

Re: EKM Push

Post by Jameson » Mon Apr 14, 2014 9:07 am

No, unfortunately I do not have any news for you. We have gotten over some major hurdles recently, so we are feeling good about it. The good news is that we have ended up with a system that is ever more robust, more scalable, and better able to accept features in the future. It is just taking forever :roll:

Thanks, I will make a note to post here when we have the Omnimeter v.4 to Push capability.
Jameson
EKM METERING
http://www.ekmmetering.com
831.425.7371

jliakos
Posts: 11
Joined: Wed Jul 17, 2013 9:41 pm

Re: EKM Push

Post by jliakos » Sun May 04, 2014 8:25 pm

Can't wait to use my Push box again with my V4 Meter :)

Post Reply