Connecting EKM Push to 2 each single phase 400 amp services

General questions and discussions focused around the EKM Metering System. Discuss your meters, installations, and meter communications here.
Post Reply
Searchman
Posts: 6
Joined: Thu Sep 13, 2012 9:01 am

Connecting EKM Push to 2 each single phase 400 amp services

Post by Searchman »

I have two 400 amp single phase services serving one residence. I currently am using 1- Omnimeter for each service. Do I need to install two Push meters or can I daisy chain the two omnimeters together and receive readings specific to each service?
Jameson
Posts: 860
Joined: Fri Nov 04, 2011 7:42 pm
Location: Santa Cruz, CA
Contact:

Re: Connecting EKM Push to 2 each single phase 400 amp servi

Post by Jameson »

If you have 2 EKM Omnimeters you will only need 1 EKM Push gateway to connect to both of your meters. You can have up to 256 EKM Omnimeters connected to 1 EKM Push gateway. The data will come in as 2 separate streams each pertaining to it's own meter number.

In our sample case 10068 and 10054 are 2 separate meters on the same EKM Push account. You can view each one separately. You can have an unlimited number of meters in your account.

Thanks!
Jameson
EKM METERING
http://www.ekmmetering.com
831.425.7371
Post Reply