Room rental sub meter

[Jameson]

Really? I would not expect to see watts or amps. Can you tell me which line you are seeing these on?

Here are the values on the LCD screen: http://documents.ekmmetering.com/EKM_Me ... eading.pdf

Can you send a photo?

Do to think it may be the L1, L2, L3, N attachments ?

FYI I would not expect there to be a connection on line 3 in a residential install.

Thanks,

[Ruzzty]

I appreciate all the help. I'm sorry but how do I attach a pic?

[Jameson]

You can either email it to us, or look at the attached screenshot.

Screenshot 2014-06-19 18.52.30.png (82.34 KiB) Viewed 7813 times

[Ruzzty]

Well, I'm out of daylight. Let me try to pick this up in the morning. Thank you for all the support. I'll have my son help me with sending a picture. Have a Blessed night.

[Karl]

[... after disconnecting and shorting all three CTs...] the meter is still running and accruing wattage.. And the blinking indicator light is blinking..
Do to think it may be the L1, L2, L3, N attachments ?

Hi Ruzzty, I am curious how this story continued. From the description I would expect your meter to show
Power = 0 Watt,
Energy (kWh) to stay exactly where it was (i.e. accrue nothing any more),
and Currents (Amperes) to be 0 for all three lines.
Only the three Voltages should show actual values.

Is that what you see (or saw) ?

Thanks,
Karl