EKM Pulse v.4 meters and the new Push/Cloud system

General questions and discussions focused around the EKM Metering System. Discuss your meters, installations, and meter communications here.
Post Reply
Ed_Mandibles
Posts: 11
Joined: Fri Aug 03, 2012 1:11 pm

EKM Pulse v.4 meters and the new Push/Cloud system

Post by Ed_Mandibles »

Has there been any progress in interfacing the v.4 meters using the EKM Push system vs. the iSerial?
I have the v.4 meters monitoring water usage in commercial buildings but want to get away from using a dedicated IP address. The Push system would solve the problem however according to the technical information on your site, only the v.3 meters will work with the Push system.

Thanks,

Ed
Jameson
Posts: 860
Joined: Fri Nov 04, 2011 7:42 pm
Location: Santa Cruz, CA
Contact:

Re: EKM Pulse v.4 meters and the new Push/Cloud system

Post by Jameson »

Hello Ed,

Glad you asked! You are right that we still havnt changed the wording on our website, but we have been slowly (secretly) rolling out the new Push system and are assigning customer v4 meters to work with EKM Pushes.

Here is an example of what the data looks like (html): http://io.ekmpush.com/readMeter/v4/key/ ... 300000369/

For more examples, please go here: http://www.ekmmetering.com/developer-portal/

So for now you can get the v4 Push meter data with your EKM Dash software or by using one of the data formats (html being the most human readable). We are working away on encompass.io and the widget.

Thanks for your patience, it was a long road :lol:
Jameson
EKM METERING
http://www.ekmmetering.com
831.425.7371
Jameson
Posts: 860
Joined: Fri Nov 04, 2011 7:42 pm
Location: Santa Cruz, CA
Contact:

Re: EKM Pulse v.4 meters and the new Push/Cloud system

Post by Jameson »

The Push to v.4 is now officially released!!!!!!

You can now connect your EKM Omnimeter Pulse v.4 meters to your EKM Push and get your electricity, water, and gas meter data sent to your EKM Push account.

Here is more information: http://www.ekmmetering.com/meter-data

The Push data now is compatible with EKM Dash software and the EKM Widget. The html API call is another good way to visually see your data. We are now working on encompass.io and getting some of our API users up to speed. wattvision.com and encompass do work, they just do not decimal shift in the places where the true kWh is displayed.

Thanks,
Jameson
EKM METERING
http://www.ekmmetering.com
831.425.7371
Post Reply