EKM Push Mounting

General questions and discussions focused around the EKM Metering System. Discuss your meters, installations, and meter communications here.
Post Reply
monte258
Posts: 1
Joined: Fri Jan 08, 2016 7:25 am

EKM Push Mounting

Post by monte258 »

I'm trying to find out how the EKM Push is mounted. I can not find any data that shows mounting holes or instructions on how or where to mount this device. Is this a portable unit? What am I missing? Thanks.
Jameson
Posts: 860
Joined: Fri Nov 04, 2011 7:42 pm
Location: Santa Cruz, CA
Contact:

Re: EKM Push Mounting

Post by Jameson »

Hello Monte,

The EKM Push is really just a box that sits near your internet router. It does not have a DIN Rail mount, or mounting screws. We have customers that mount them with velcro, screws, or DIN Rail mount them with something like this: http://www.automationdirect.com/adc/Sho ... Anhr8P8HAQ

This 3D Model is a very close approximation of the shape (including the back) of the EKM Push Case: https://sketchfab.com/models/3d5a06f5ac ... 6937288433

Hope this helps, let us know if you have any questions.
Jameson
EKM METERING
http://www.ekmmetering.com
831.425.7371
Nevland
Posts: 65
Joined: Tue Jul 31, 2012 2:56 pm
Location: Nevada City CA

Re: EKM Push Mounting

Post by Nevland »

I used 3M double face tape. Heating the tape with a hair drier make it very firm. I wished the collections came out the back so it would look nicer on my desk.
Post Reply