Since PVoutput support EKMv4, I try to add v4 meter in Pvoutput. but it is not work. (v3 is work good)

For EKMv4 the following is expected in the data -

RMS_Watts_Ln_1

RMS_Watts_Ln_2

RMS_Watts_Ln_3

This meter has RMS_Watts_Tot instead of RMS_Watts_Ln_3, so it won't work.

My system is 2-line power grid. my question is why v4 meter will missing Ln_3 data, it should be appear and just put void, but the field should be exist

## EKMv4 not work in PVoutout

### Re: EKMv4 not work in PVoutout

we also check the API

http://io.ekmpush.com/readMeter/v4/mete ... ormat/csv/

Meter,Date,Time,Time_Stamp_UTC_ms,kWh_Tot,kWh_Tariff_1,kWh_Tariff_2,Rev_kWh_Tot,Rev_kWh_Tariff_1,Rev_kWh_Tariff_2,RMS_Volts_Ln_1,RMS_Volts_Ln_2,Amps_Ln_1,Amps_Ln_2,RMS_Watts_Ln_1,RMS_Watts_Ln_2,RMS_Watts_Tot,Power_Factor_Ln_1,Power_Factor_Ln_2,Power_Factor_Ln_3,RMS_Watts_Max_Demand,CT_Ratio,Pulse_Ratio_1,Pulse_Ratio_2,Pulse_Ratio_3,Reactive_Energy_Tot,kWh_Rst,Rev_kWh_Rst,Reactive_Pwr_Ln_1,Reactive_Pwr_Ln_2,Reactive_Pwr_Tot,Line_Freq,kWh_Ln_1,kWh_Ln_2,Rev_kWh_Ln_1,Rev_kWh_Ln_2,CF_Ratio,Net_Calc_Watts_Ln_1,Net_Calc_Watts_Ln_2,Net_Calc_Watts_Tot

300000211,06/05/2018,15:13:05,1528211585364,15701.12,9318.80,6382.32,15695.29,9312.96,6382.33,112.4,112.6,11.2,15.2,1076,1596,2674,102,101,200,7390,200,1000,1000,1000,2925.03,15701.12,15695.29,232,232,464,59.95,5804.95,9893.98,5803.24,9889.87,800,-1076,-1596,-2672

not all the filed reply from server, for example the State_Watts_Dir Real-time direction of current will not included

Line1/Line2/Line3

Forward/Forward/Forward = 1

Forward/Forward/Reverse = 2

Forward/Reverse/Forward = 3

Reverse/Forward/Forward = 4

Forward/Reverse/Reverse = 5

Reverse/Forward/Reverse = 6

Reverse/Reverse/Forward = 7

Reverse/Reverse/Reverse = 8

if two line system, some of line3 is not shown.

http://io.ekmpush.com/readMeter/v4/mete ... ormat/csv/

Meter,Date,Time,Time_Stamp_UTC_ms,kWh_Tot,kWh_Tariff_1,kWh_Tariff_2,Rev_kWh_Tot,Rev_kWh_Tariff_1,Rev_kWh_Tariff_2,RMS_Volts_Ln_1,RMS_Volts_Ln_2,Amps_Ln_1,Amps_Ln_2,RMS_Watts_Ln_1,RMS_Watts_Ln_2,RMS_Watts_Tot,Power_Factor_Ln_1,Power_Factor_Ln_2,Power_Factor_Ln_3,RMS_Watts_Max_Demand,CT_Ratio,Pulse_Ratio_1,Pulse_Ratio_2,Pulse_Ratio_3,Reactive_Energy_Tot,kWh_Rst,Rev_kWh_Rst,Reactive_Pwr_Ln_1,Reactive_Pwr_Ln_2,Reactive_Pwr_Tot,Line_Freq,kWh_Ln_1,kWh_Ln_2,Rev_kWh_Ln_1,Rev_kWh_Ln_2,CF_Ratio,Net_Calc_Watts_Ln_1,Net_Calc_Watts_Ln_2,Net_Calc_Watts_Tot

300000211,06/05/2018,15:13:05,1528211585364,15701.12,9318.80,6382.32,15695.29,9312.96,6382.33,112.4,112.6,11.2,15.2,1076,1596,2674,102,101,200,7390,200,1000,1000,1000,2925.03,15701.12,15695.29,232,232,464,59.95,5804.95,9893.98,5803.24,9889.87,800,-1076,-1596,-2672

not all the filed reply from server, for example the State_Watts_Dir Real-time direction of current will not included

Line1/Line2/Line3

Forward/Forward/Forward = 1

Forward/Forward/Reverse = 2

Forward/Reverse/Forward = 3

Reverse/Forward/Forward = 4

Forward/Reverse/Reverse = 5

Reverse/Forward/Reverse = 6

Reverse/Reverse/Forward = 7

Reverse/Reverse/Reverse = 8

if two line system, some of line3 is not shown.

### Re: EKMv4 not work in PVoutout

Hello Stishsun,

PVOutput is a 3rd party site that takes in your Push data and displays it to you. I think they take in Total Watts and Total kWh.

RMS_Watts_Ln_1, RMS_Watts_Ln_2, RMS_Watts_Ln_3 are the watts on each line. I do not think PVOutput displays this data on their site.

If you have RMS_Watts_Ln_3 = 0 then this will not display in your EKM Push data. Any value that is zero, will not display in the EKM Push data.

Here is the link that you posted, with the data displayed in html format (rather than csv) and showing the latest 30 reads (rather than just 1): http://io.ekmpush.com/readMeter/v4/mete ... ormat/html

Here are some of the values that are not displaying because they have a zero value in your Push data:

kWh_Tariff_3

kWh_Tariff_4

Rev_kWh_Tariff_3

Rev_kWh_Tariff_4

Amps_Ln_3

RMS_Volts_Ln_3

RMS_Watts_Ln_3

Net_Calc_Watts_Ln_3

Pulse_Cnt_1

Pulse_Cnt_2

Pulse_Cnt_3

Max_Demand_Rst

Reactive_Pwr_Ln_3

To see all of your values you can use the EKM Dash software to gather your EKM Push data. Zero values are displayed in the EKM Dash.

Your State_Watts_Dir = 7 Please let me know if you have any questions.

PVOutput is a 3rd party site that takes in your Push data and displays it to you. I think they take in Total Watts and Total kWh.

RMS_Watts_Ln_1, RMS_Watts_Ln_2, RMS_Watts_Ln_3 are the watts on each line. I do not think PVOutput displays this data on their site.

If you have RMS_Watts_Ln_3 = 0 then this will not display in your EKM Push data. Any value that is zero, will not display in the EKM Push data.

Here is the link that you posted, with the data displayed in html format (rather than csv) and showing the latest 30 reads (rather than just 1): http://io.ekmpush.com/readMeter/v4/mete ... ormat/html

Here are some of the values that are not displaying because they have a zero value in your Push data:

kWh_Tariff_3

kWh_Tariff_4

Rev_kWh_Tariff_3

Rev_kWh_Tariff_4

Amps_Ln_3

RMS_Volts_Ln_3

RMS_Watts_Ln_3

Net_Calc_Watts_Ln_3

Pulse_Cnt_1

Pulse_Cnt_2

Pulse_Cnt_3

Max_Demand_Rst

Reactive_Pwr_Ln_3

To see all of your values you can use the EKM Dash software to gather your EKM Push data. Zero values are displayed in the EKM Dash.

Your State_Watts_Dir = 7 Please let me know if you have any questions.