Non-Volatile Memory in Pulse V.4
Posted: Wed Jan 08, 2020 3:00 pm
I am using an Omnimeter Pulse V.4 with Dash software to collect kWhr and water meter pulse data on an hourly basis. X-bee radio link from remote with RS-485 to EKM Blink to adapt to USB for a desktop computer in the office.
I experienced an extended power failure at the site a few days ago (for about 36 hrs.) and when the power was restored, the Omnimeter data displayed in the Dash utility shows the kWhr. data as properly accumulated but it looks like my pulse data from the water meter was lost and the counter was reset to zero.
Are the pulse inputs not backed up in non-volatile memory in the Ominmeter Pulse v.4?
I experienced an extended power failure at the site a few days ago (for about 36 hrs.) and when the power was restored, the Omnimeter data displayed in the Dash utility shows the kWhr. data as properly accumulated but it looks like my pulse data from the water meter was lost and the counter was reset to zero.
Are the pulse inputs not backed up in non-volatile memory in the Ominmeter Pulse v.4?