Mounting the 8 Digit Pulse Counter in a Standard Cover Plate

[Jameson]

How to mount your 8 Digit Pulse Counter in a standard wall cover plate.

1) Buy a wall cover plate that has widely spaced mounting holes (about 3 1/4" inches apart, not 2 3/8" like a regular light switch cover)

EKM Metering 8 Digit Pulse Counter PC8.jpg (432.81 KiB) Viewed 32419 times

2) Mark the opening you will make. We used 22.2 mm x 45 mm

EKM Metering 8 Digit Pulse Counter PC8-2.jpg (466.79 KiB) Viewed 32419 times

3) Use a router to cut the opening and a file to square up the corners and make the finishing touches.

EKM Metering 8 Digit Pulse Counter PC8-3.jpg (618.59 KiB) Viewed 32419 times

4) Shot of the back

EKM Metering 8 Digit Pulse Counter PC8-4.jpg (535.64 KiB) Viewed 32419 times

5) You could easily fit 2 Pulse Counters in 1 cover plate if you needed to.

Here is a link to the 8 Digit Pulse Counter on our website: http://www.ekmmetering.com/ekm-metering ... ter-8.html

Thanks, let me know if this was helpful

[Jameson]

The link in the post above is broken.

Here is a link to the 8 Digit Pulse Counter product page: http://www.ekmmetering.com/8-digit-pulse-counter.html

Here is a link to the 8 Digit Pulse Counter spec sheet: http://documents.ekmmetering.com/Eight- ... -Sheet.pdf

Thanks,