Mounting the 8 Digit Pulse Counter in a Standard Cover Plate

Things we have found to be useful when installing or using our metering systems.
Post Reply
Jameson
Posts: 860
Joined: Fri Nov 04, 2011 7:42 pm
Location: Santa Cruz, CA
Contact:

Mounting the 8 Digit Pulse Counter in a Standard Cover Plate

Post by Jameson »

How to mount your 8 Digit Pulse Counter in a standard wall cover plate.

1) Buy a wall cover plate that has widely spaced mounting holes (about 3 1/4" inches apart, not 2 3/8" like a regular light switch cover)
EKM Metering 8 Digit Pulse Counter PC8.jpg
EKM Metering 8 Digit Pulse Counter PC8.jpg (432.81 KiB) Viewed 20160 times
2) Mark the opening you will make. We used 22.2 mm x 45 mm
EKM Metering 8 Digit Pulse Counter PC8-2.jpg
EKM Metering 8 Digit Pulse Counter PC8-2.jpg (466.79 KiB) Viewed 20160 times
3) Use a router to cut the opening and a file to square up the corners and make the finishing touches.
EKM Metering 8 Digit Pulse Counter PC8-3.jpg
EKM Metering 8 Digit Pulse Counter PC8-3.jpg (618.59 KiB) Viewed 20160 times
4) Shot of the back
EKM Metering 8 Digit Pulse Counter PC8-4.jpg
EKM Metering 8 Digit Pulse Counter PC8-4.jpg (535.64 KiB) Viewed 20160 times
5) You could easily fit 2 Pulse Counters in 1 cover plate if you needed to.

Here is a link to the 8 Digit Pulse Counter on our website: http://www.ekmmetering.com/ekm-metering ... ter-8.html

Thanks, let me know if this was helpful :?: :?:
Jameson
EKM METERING
http://www.ekmmetering.com
831.425.7371
Jameson
Posts: 860
Joined: Fri Nov 04, 2011 7:42 pm
Location: Santa Cruz, CA
Contact:

Re: Mounting the 8 Digit Pulse Counter in a Standard Cover Plate

Post by Jameson »

The link in the post above is broken.

Here is a link to the 8 Digit Pulse Counter product page: http://www.ekmmetering.com/8-digit-pulse-counter.html

Here is a link to the 8 Digit Pulse Counter spec sheet: http://documents.ekmmetering.com/Eight- ... -Sheet.pdf

Thanks,
Jameson
EKM METERING
http://www.ekmmetering.com
831.425.7371
Post Reply