iSerial emulation

For more advanced meter data users. Learn from others and ask questions about how to read meters, how to use the EKM Push Data, and how to display the meter data in useful ways.
Post Reply
aquarat
Posts: 7
Joined: Mon Sep 24, 2012 5:40 am

iSerial emulation

Post by aquarat » Fri Feb 01, 2013 9:25 am

Hi

If you happen to have an EKM meter attached to a remote Linux machine via a serial port and you'd like to configure the meter using EKM Dash, you can use the following command to share the serial port as if it were attached to an iSerial :

socat TCP-LISTEN:50000,fork /dev/ttyUSB0,raw,b9600,csize=2

b9600 is the baud
csize=2 means 7 data bits (socat refers to them as the character size)

Post Reply