C code/library for EKM Omnimeter

For more advanced meter data users. Learn from others and ask questions about how to read meters, how to use the EKM Push Data, and how to display the meter data in useful ways.
Post Reply
Posts: 11
Joined: Fri Jul 06, 2012 12:01 am

C code/library for EKM Omnimeter

Post by ianf »


This is something that I meant to make publicly available around 7 years ago. Hopefully it will help someone here read data from the meters. Originally, I intended to add support for several meters, but I only ever had access to the Omnimeter 1v.3. The intention was to use unions to handle multiple meter versions defined in ekmprivate.h. Anyway, it should provide a good starting point for people wishing to write their own code to read the meters. The library will can set the meter's RTC according to the computer time.

Several functions are missing:
1. read/set TOU rates.
2. read/set holidays.
3. read/set TOU schedule.


The compiled program will produce text output as follows:

meter: 11766 19
L1 Volts: 241.8
L1 Amps: 0.0
L1 Power: 0
L1 PF: -0.00
CT Size: 200
Frw kWh: 533.0
Rev kWh: 0.0
Demand: 6915
Demand Period: 1
meter: 12000 19
L1 Volts: 229.6
L1 Amps: 2.6
L1 Power: 596
L1 PF: -0.98
CT Size: 200
Frw kWh: 15397.9
Rev kWh: 0.0
Demand: 6435
Demand Period: 1

I'm adapting this code to run on an ESP8266 board for data logging.

Post Reply