Hi,
is there a link somewhere for the iserial firmware and serial port drivers?
I have an iserial v2 from '08 and have finally got some time to try and getting it working again
Cheers, Ian.
Firmware for iSerial v.2
-
- Posts: 56
- Joined: Fri Dec 16, 2011 10:42 pm
- Location: Victoria, Australia
Re: Firmware for iSerial v.2
Hi Ian,
This might be of use to you. If for any reason you can't download it just PM your email address.
This might be of use to you. If for any reason you can't download it just PM your email address.
- Attachments
-
- ATC-1000 TCP_IP Converter exe_NetUART_v1.43.rar
- (113.16 KiB) Downloaded 993 times
Re: Firmware for iSerial v.2
Here is the latest version of the EKM iSerial firmware (v.1.44.3.1) for those who would like it.
(this is a .rar file that may be best handled on a PC)
Fixes an issue with high latency networks, and some reliability issues.
Thanks,
(this is a .rar file that may be best handled on a PC)
Fixes an issue with high latency networks, and some reliability issues.
Thanks,
Re: Firmware for iSerial v.2
I tried to update the firmware on my iserial and I'm stuck with this image, I get "Please use correct binary file!" Tried safari and firefox as well.
Now it's stuck
F/W
Select the image file:
http://192.168.0.10
Now it's stuck
F/W
Select the image file:
http://192.168.0.10
Re: Firmware for iSerial v.2
That does not sound good. I dont have experience with this, it does not sound good. Are you able to log into the iSerial at all? Can you see it if you run the VCOM software on a PC?
VCOM software link is about halfway down this page: http://www.ekmmetering.com/information/ ... links.html
VCOM software link is about halfway down this page: http://www.ekmmetering.com/information/ ... links.html