While trying to figure out a way to track my utility bill which is based on tier system I noticed the following.
1. The new Dash software (.288) does not allow (at least I can't find it) the last 6 months reports that V3 provides.
2. The V3, 6 month reports seem to be off by a factor of 10. Last month (Aug) Meter Reading shows 1250.9 with a net of 87.6. Today my Meters reads 12808.7 an my utility bill me for 862 KWH. Note: utility reads meter on the 6th so I don't expect them to be exact, but not off by a factor of 10.
?????
Bill
Sowfware-Dash and V3.1.134
Re: Sowfware-Dash and V3.1.134
Hey Bill!!
If you open the EKM Dash software and then click on "Edit Meter" then click on the "Data" tab, this will read your meters' 6 Months of Monthly data (this is 6 separate meter kWh reads that are stored inside the meter, they are taken once a month on the last day of the month)
One caveat is that the EKM Dash that is currently on the website parses the EKM-Omnimeter data wrong for the 6 Months Data. This is the same issue as you were having with the EKM Reader software (off by a factor of 10), this is because the decimal is in the wrong spot. I will send you an updated copy that we will be releasing soon.
If you have any questions, please let us know.
If you open the EKM Dash software and then click on "Edit Meter" then click on the "Data" tab, this will read your meters' 6 Months of Monthly data (this is 6 separate meter kWh reads that are stored inside the meter, they are taken once a month on the last day of the month)
One caveat is that the EKM Dash that is currently on the website parses the EKM-Omnimeter data wrong for the 6 Months Data. This is the same issue as you were having with the EKM Reader software (off by a factor of 10), this is because the decimal is in the wrong spot. I will send you an updated copy that we will be releasing soon.
If you have any questions, please let us know.