Meter date not correct

Forum is open to all questions, answers, and discussions related to electric meters, ours or others.
Post Reply
pvanmastrigt
Posts: 36
Joined: Sun May 26, 2013 1:00 am

Meter date not correct

Post by pvanmastrigt »

Hello,

I am using the EKM Omnimeter Pulse V4 and have recently installed EKM Dash Version 1.3.0.9. I now notice that the meter date always has the same setting as the computer date. This used to be very different as my meter is about 7 time zones away. I have tried to change the meter date (really the time) through the EKM Dash software " meters ">> edit meter >> General >> (change the time) >> set (password) >> " Date and time changed successfully"; but nothing really changes. I have a Sony VPCJ218FG windows 7 machine (64 bit) with the Dash software. I also have an old MacBook (32 bit Mac OS 10.6.8) and a free version of the Dash software. This should not be able to change the time, but the software seemingly does try (" date and time changed successfully") but the net results is no change either.

O.K. - this is not a big thing, but seems a bug in 1.3 ? Any solution?

With regards
Piet van Mastrigt
Jameson
Posts: 860
Joined: Fri Nov 04, 2011 7:42 pm
Location: Santa Cruz, CA
Contact:

Re: Meter date not correct

Post by Jameson »

Thanks for letting us know pvanmastrigt,

This seems to be related to a Dash to v4 meter time issue an issue that was brought to our attention recently. I will address it here: http://forum.ekmmetering.com/viewtopic.php?f=1&t=3303

We are working on the fix now.

Thanks for your support, we really appreciate it.
Jameson
EKM METERING
http://www.ekmmetering.com
831.425.7371
Post Reply