Smart Home Integration

Forum is open to all questions, answers, and discussions related to water meters, ours or others.
Post Reply
Posts: 1
Joined: Fri Jun 01, 2018 7:01 am

Smart Home Integration

Post by LDenny » Fri Jun 01, 2018 7:13 am

I wanted to pass along the results of my setup, which includes the integration of two HD water meters with my whole-house energy monitoring system.

To connect the meters to my Brultech GEM/DashBoard monitor, I used Cat5 Ethernet cable and was able to get a solid signal between my irrigation controller master valve and my Halo5 whole-house water purification system (each of the connections is over 40 feet in separation).

The deviation between the pulse-counter readings between my monitoring station and the municipal water district's smart meter has been approximately 2 percent overall.

I'm very happy with the results -- and with the two (3/4") vertical HD water meters.


Posts: 779
Joined: Fri Nov 04, 2011 7:42 pm
Location: Santa Cruz, CA

Re: Smart Home Integration

Post by Jameson » Fri Jun 01, 2018 2:03 pm

Hello Lee,

Thank you very much for checking back in and for the feedback on your water meter system! We really appreciate it.

If you get a chance would you post some photos of your setup, or screenshots of your data on the Brultech side?

Glad to hear all is well,

Post Reply