EKM Metering

Hi every one,
I bought Ekm-OmniMeter v.3 , but I don’t know how to recover the data in case of having no wifi.
Also, if there is a memory, how big is it, how long it takes to be full or does it over read the older data?
Regards,

Hello saadhamad, welcome to the forum.

The Omnimeter v.3 only stores Total kWh, Reverse kWh, Total kWh in 4 TOU periods, Reverse kWh in 4 TOU periods. It also stores 6 months of Total and Reverse kWh values taken on the last day of each month (these values are only accessible via the EKM Dash using a USB or iSerial converter) It does not store real-time values like watts, amps, volts or power factor. If you want a full dataset (a read a minute for example) you will have to connect your EKM Omnimeter to either a computer running the EKM Dash software, or to the EKM Push system.