EKM Dash 2.2.4 performing poorly on MacOS Catalina

General questions and discussions focused around the EKM Metering System. Discuss your meters, installations, and meter communications here.
Post Reply
pvanmastrigt
Posts: 29
Joined: Sun May 26, 2013 1:00 am

EKM Dash 2.2.4 performing poorly on MacOS Catalina

Post by pvanmastrigt » Fri Oct 23, 2020 10:17 pm

Dear Forum/Jameson,

I have upgraded my iMac to OS 10.15.7 - Catalina. The EKM Dash software has been re-installed and I have version 2.2.4 (the latest at the time of writing this post).

Performance of the Dash software has really deteriorated after this upgrade.

I note that whilst the software starts and seems to get on with reading remote meters, the performance drops significantly after a while (hours/days) resulting in skipping 200 or so reads and interchange that with longer times of no reads (day(s)). The software often (I think now: always) becomes unresponsive and the only way out is force quit. The error dumps are forwarded to Apple for analysis, but of cause I don't hear back.

I did not find any such report on this forum. Does anyone else experience this? Any solutions? I'll wait for the next stall and post the error dump.

With regards
Piet van Mastrigt
Attachments
Screenshot 2020-10-24 at 1.19.20 PM.png
Screenshot 2020-10-24 at 1.19.20 PM.png (683.88 KiB) Viewed 1571 times

Jameson
Posts: 788
Joined: Fri Nov 04, 2011 7:42 pm
Location: Santa Cruz, CA
Contact:

Re: EKM Dash 2.2.4 performing poorly on MacOS Catalina

Post by Jameson » Fri Oct 30, 2020 2:59 am

Hello Piet,

Great to hear from you. Sorry that you are having trouble with the stability of Dash 2.2.4 with Catalina (OSX Catalina has certainly been its own ball of wax!) Yes, please post the error reports here or email them to support@ekmmetering.com

I have also experienced similar things and have not yet narrowed down as to why it happens (so any insights any of you have out there, please let us know). But if I run the EKM Dash for something like a week at a time on a Mac, it sometimes will go unresponsive. I have to "Force Quit" Dash in order to get it back. I have not noticed the "skipping 200 or so reads" that you mentioned. Is this when your mac is asleep, or does it also happen when you are using your mac and it is not asleep?

The more evidence we can gather as to when this happens, or why this happens, the easier it will be for us to fix it. Thank you for your help, we really do appreciate it :ugeek:
Jameson
EKM METERING
http://www.ekmmetering.com
831.425.7371

pvanmastrigt
Posts: 29
Joined: Sun May 26, 2013 1:00 am

Re: EKM Dash 2.2.4 performing poorly on MacOS Catalina

Post by pvanmastrigt » Sat Nov 07, 2020 5:11 am

Hello Jameson,

Recently everything seems to be stable - I have not had any hick-ups anymore for a few days now. The version of MacOS is 10.15.7 Frankly I have not really paid sufficient attention and did not realise the Dash software was not running for a while. Meanwhile there may have been some Catalina updates. I restarted Dash about 3 days ago and there seem to be no issues. I like problems that solve themselves.... with regards,
Piet

pvanmastrigt
Posts: 29
Joined: Sun May 26, 2013 1:00 am

Re: EKM Dash 2.2.4 performing poorly on MacOS Catalina

Post by pvanmastrigt » Fri Nov 13, 2020 11:36 pm

Hello Jameson, unfortunately I was too early stating that there seem no issues: the software went unresponsive just a day after the post above. A simple restart resolved the matter. There was no error log generated somehow. I'll wait for the next time.

Regards
Piet

Post Reply