How to meter main Panel with a submeter on a panel downstream
Posted: Thu Feb 29, 2024 1:54 pm
I have a main home on a Main 200a panel.
I have a second smaller home on a 60a panel downstream of the main panel. It is powered by a breaker on main panel.
I have tenants in each home I would like to Bill using encompass.
I was able to hook up a Push3 and omnimeter v.4 to the subpanel to monitor the smaller home and set up online billing via encompass.
basically my setup now is in this order : Main Meter> Main electric panel > omnimeterv.4 > Small home subpanel.
I would like to be able to create a bill using the encompass billing tools for the main home, however I do not have any submeter on the main home.
I would like to subtract the amount owed/energy used on the smaller home from my main electric and gas bills, and bill the tenant in the main home accordingly.
I am able to create separate groups for each home on encompass, but I am not able to set up billing for one of the homes due to no submeter being on it. Is there a way to override this and enter information manually?
I have a second smaller home on a 60a panel downstream of the main panel. It is powered by a breaker on main panel.
I have tenants in each home I would like to Bill using encompass.
I was able to hook up a Push3 and omnimeter v.4 to the subpanel to monitor the smaller home and set up online billing via encompass.
basically my setup now is in this order : Main Meter> Main electric panel > omnimeterv.4 > Small home subpanel.
I would like to be able to create a bill using the encompass billing tools for the main home, however I do not have any submeter on the main home.
I would like to subtract the amount owed/energy used on the smaller home from my main electric and gas bills, and bill the tenant in the main home accordingly.
I am able to create separate groups for each home on encompass, but I am not able to set up billing for one of the homes due to no submeter being on it. Is there a way to override this and enter information manually?