Gas meter specs
Posted: Thu Dec 13, 2012 5:32 pm
Here is all the data that we have on the gas meter:
Size: G4
Dimensions: 10" Tall x 7.5" Wide x 6.5" Deep Or: H225xW201xD165 mm
No power source required
Casing: Steel
Connection Thread: G1 1/4
Thread Distance: 110 mm
Direction of inlet: Left in right out
Reed Switches: oki-ord324
Reed Switch Pulse output: 1mp=1 ft3
Min pulse time: ≥ 2.4s
Contact resistance: 100mOhms
Contact rating 10W
12vdc max and 830mA max
Nominal flow-rate (Qn): 141 ft3/h
Minimum flow-rate (Qmin): 1.41 ft3/h
Maximum flow-rate (Qmax): 211cu. ft/h or about 211,000 BTU per hour.
Operating pressure range: 7.25 psi
Total pressure absorption: ≤200 Pa
Vc: 0.042 cu. ft/h
Cyclic: 0.042 ft3/rev
Permissible Error:
Qmin≤Q<0.1Qmax ± 3%
0.1Qmax≤Q≤Qmax ±1.5%
Min. Recording Reading: 0.02 ft3
Max. Recording Reading: 9999999.9 ft3/h
Readout is in cubic feet, with resolution to tenths
Operating ambient temperature: -20~+50 °C
Memory temperature: -20~+50 °C
Service life: ≥10years
Can measure: Artificial coal gas, natural gas, liquefied petroleum gas, air, propane, inert gases or any other non-corrosive gas
Weight: 4 lbs., 10 oz. Or: 2.1kg
Meter design according Standards: OIML R31 or EN1359
Index cover: Printed index cover of polycarbonate
Surface painting: Polyester powder coated suitable for indoor or outdoor installation
-- Seth
Size: G4
Dimensions: 10" Tall x 7.5" Wide x 6.5" Deep Or: H225xW201xD165 mm
No power source required
Casing: Steel
Connection Thread: G1 1/4
Thread Distance: 110 mm
Direction of inlet: Left in right out
Reed Switches: oki-ord324
Reed Switch Pulse output: 1mp=1 ft3
Min pulse time: ≥ 2.4s
Contact resistance: 100mOhms
Contact rating 10W
12vdc max and 830mA max
Nominal flow-rate (Qn): 141 ft3/h
Minimum flow-rate (Qmin): 1.41 ft3/h
Maximum flow-rate (Qmax): 211cu. ft/h or about 211,000 BTU per hour.
Operating pressure range: 7.25 psi
Total pressure absorption: ≤200 Pa
Vc: 0.042 cu. ft/h
Cyclic: 0.042 ft3/rev
Permissible Error:
Qmin≤Q<0.1Qmax ± 3%
0.1Qmax≤Q≤Qmax ±1.5%
Min. Recording Reading: 0.02 ft3
Max. Recording Reading: 9999999.9 ft3/h
Readout is in cubic feet, with resolution to tenths
Operating ambient temperature: -20~+50 °C
Memory temperature: -20~+50 °C
Service life: ≥10years
Can measure: Artificial coal gas, natural gas, liquefied petroleum gas, air, propane, inert gases or any other non-corrosive gas
Weight: 4 lbs., 10 oz. Or: 2.1kg
Meter design according Standards: OIML R31 or EN1359
Index cover: Printed index cover of polycarbonate
Surface painting: Polyester powder coated suitable for indoor or outdoor installation
-- Seth