EKM Dash - Real time chart update requested
Posted: Sun Apr 03, 2016 7:18 am
Dear EKM developers,
Not sure if anyone has asked yet, so here is my question: would it be possible to plot other parameters in the Real Time Chart, i.e. not Voltage or Power, but instead I would like to plot my water usage (Pulse 1 in my case) - or better still, the pulse count / day to avoid an ever increasing plot.
Appreciate advice,
With regards
Piet van Mastrigt.
My installation:
EKM iSerial v.2 TCP/IP Ethernet to RS-485 Serial Converter
EKM Omnimeter Pulse v.4 - Pulse Counting, Relay Controlling, Universal Smart Electric Meter
Not sure if anyone has asked yet, so here is my question: would it be possible to plot other parameters in the Real Time Chart, i.e. not Voltage or Power, but instead I would like to plot my water usage (Pulse 1 in my case) - or better still, the pulse count / day to avoid an ever increasing plot.
Appreciate advice,
With regards
Piet van Mastrigt.
My installation:
EKM iSerial v.2 TCP/IP Ethernet to RS-485 Serial Converter
EKM Omnimeter Pulse v.4 - Pulse Counting, Relay Controlling, Universal Smart Electric Meter