ekm metering iserial v2

For more advanced meter data users. Learn from others and ask questions about how to read meters, how to use the EKM Push Data, and how to display the meter data in useful ways.
Post Reply
watata
Posts: 1
Joined: Thu Nov 22, 2018 6:21 am

ekm metering iserial v2

Post by watata » Thu Nov 22, 2018 6:49 am

Hi.
I have a problem with ekm iserial v.2
kernel V1.44.3 2012/05/09

can i upgrade the firmware?
how can i do it?
because i dont find where...

thanks

Jameson
Posts: 749
Joined: Fri Nov 04, 2011 7:42 pm
Location: Santa Cruz, CA
Contact:

Re: ekm metering iserial v2

Post by Jameson » Sat Nov 24, 2018 6:44 am

It depends on how old your iSerial is. The older versions did not allow an upgrade. If you can upgrade, you can try this process:

===

First download the new iSerial firmware here (file is called nu_flashapp): http://documents.ekmmetering.com/iSeria ... ashapp.bin

Then log into your iSerial using a PC with either Internet Explorer or Firefox. Or Firefox on Mac OSX.

Click on Firmware Update

If it asks for a password enter "admin"

iSerial will erase flash which takes a few seconds.

Use the browse button to find the image that you downloaded (called nu_flashapp.bin or nu_flashapp)

Open or Select nu_flashapp.bin and click "Update"

Wait at least a minute.
Jameson
EKM METERING
http://www.ekmmetering.com
831.425.7371

Post Reply