V4 logging of active and reactive power

Forum is open to all questions, answers, and discussions related to electric meters, ours or others.
Post Reply
beyondtech
Posts: 1
Joined: Sun Jan 08, 2017 5:00 pm

V4 logging of active and reactive power

Post by beyondtech » Sun Jan 08, 2017 5:21 pm

Hi,
Does the v4 with the Push device offer real time logging of active and reactive power per each of 3 phases and neutral together with voltage?
Thanks.

Jameson
Posts: 779
Joined: Fri Nov 04, 2011 7:42 pm
Location: Santa Cruz, CA
Contact:

Re: V4 logging of active and reactive power

Post by Jameson » Mon Jan 09, 2017 7:30 pm

Hello!

Yes, the Omnimeter Pulse v.4 keeps measures both watts, and reactive power (VARS) on each line. As well as volts, amps, kWh, and power factor on each line. It also measures total watts, total reactive power (Total VARS), total reactive energy (kVARh).

http://documents.ekmmetering.com/Omnime ... -Chart.pdf

Each of these values (plus many more) is polled once a minute by the EKM Push and sent to your cloud account.

http://io.ekmpush.com/readMeter?meters= ... tml&cnt=10
Jameson
EKM METERING
http://www.ekmmetering.com
831.425.7371

Post Reply